Tech Support Guy banner
Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi, hope someone can help.

Just got new Toshiba A200 laptop with windows VISTA. Trying to go wireless using BT Home Hub.

First, connected it with Ethernet cable - fine.
Then, switched on wireless function and connected via wirelss - it found it, and it all worked fine. Then, I downloaded updates and re-booted machine.

Then, wireless still recognises the BT HomeHub, but just says connection has 'Limited or no Connectivity' - it still works fine though when wired through the Ethernet cable.

When looking at the connections, the wireless one has the letter G along it with a triangle warnign sign....

My router works fine as I run my PS3 through it all the time.

Help! Any help would be much appreciated!
 

·
Retired Moderator
Joined
·
106,726 Posts
TCP/IP stack repair options for use with Windows Vista.

Start, Programs\Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt.

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log

Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log

Reboot the machine.

After doing this and rebooting, let's see this.

Hold the Windows key and press R, then type CMD to open a command prompt:

Type the following command:

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
 

·
Registered
Joined
·
1 Posts
I tried to do it, but when I had written
'netsh int ipv6 reset reset.log' on my desktop appeard info
'accesc is denied. there's no user specified settings to be reset'

so i still have no internet on my pc ; (
 

·
Retired Moderator
Joined
·
106,726 Posts
Hold the Windows key and press R, then type CMD to open a command prompt:

In the command prompt window that opens, type type the following command:

Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top