Tech Support Guy banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hello there - hope that you can lend a helping hand.

We have two computers - one for me (work computer) and one for the kids. Computer #1 has:
Windows XP and Fixed wireless internet connection with an Orinoco Client manager, silver card, and base station.

Computer #2 has:
Windows 2000 - no internet connection.

I would like to set things up where Computer #2 shares the internet connection Computer #1 has.

We purchased a Linksys 2.4 GHz Wireless B Broadband Router BEFW11s4-VN
and a
Linksys Wireless USB Adapter.

I thought that the current internet connection we have would just plug into the router and then into the computer for setup - wrong.

I have no idea how to hook this up - all of the instructions are for DSL/cable modems. But we do not have that - we have fixed wireless (radio tower connection) and not sure how to set this up.

Any suggestions on how to setup this to work - or another method all together. Any help you can offer is greatly appreciated.

Thanks again!

Chads mom
 

·
Registered
Joined
·
48 Posts
I am not completely clear on your setup, but I would make several suggestions. If its possible to have multiple wireless connections to your base station just use the wireless usb adapter on the second computer and connect to the base station. If not, I would suggest skipping the linksys router you purchases all together. Run a crossover cable from your XP system with the internet connection to the win2000 system. Set up a peer to peer connection between the two computers using windows connection wizard on the XP system, and then run that same setup on the win2k system. When choosing the options on setup, make sure that you have the XP system as "this computer connects to the internet directly, all computers connect to the internet thru this computer." and on the 2000 computer make sure you choose "this computer connects to the internet through another computer." Essentially what this should do is "bridge" the two connections, and both computers should be able to surf on the internet.
Good luck and let me know how it goes.
-Cwolly
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top