Tech Support Guy banner

Windows protection error, urgent!!

639 Views 1 Reply 2 Participants Last post by  bassetman
Hey, I just changed the graphics card, motherboard and processor in my totaly stable system. I now have a Asus P4PE a P4 2.4B and a Albatron GF4Ti 4200 64Mb. I'm running windows 98 gold.

Obviously, it didnt run smoothly

On booting I got the message:

While initializing device NDIS:
Windows protection error. You need to restart your computer.

I manages to boot my computer by booting with steop-by-step comformation and choosing not to load NDIS and NDIS2sup.

My computer runs fine wihtout these but because they are something to do with networking I can't acces the internet or my lan, not to mention the 5 minute long process to boot!!!

can anyone spread any light on the subject? Anyhelp much apreciated.

Not open for further replies.
1 - 2 of 2 Posts
I found this

May be of help.



Here some more info from another forum.

PAul, The 1st 2 are only loaded if needed your system KNOWS. The last is actually missing(FIND here: Put in sytem dir..

On Saturday, November 2, 2002 at 1:57 pm, PAul wrote:
>I have been having problems with my computer freezing up and also beeping when I
>boot up.
>I recently checked out the beep code and I either have a motherboard problem or a
>video card problem.
>I checked out my bootlog.txt file and found these failed messages. Can anyone tell
>me what these mean and what I need to do to correct it?
>Dynamicloadfailed:C:\Windows|System\MRCI>VXD:(0012E904File not found)
>Thanks for any help.
It is from the bottom of the page here

See less See more
1 - 2 of 2 Posts
Not open for further replies.