Tech Support Guy banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hello everyone!
Heres the deal. I have two computers I hooked to a network hub (one computer directly plugs in while the other is wireless), and the hub connects to a cable modem that connects to the world wide web. Okay, now both computers are able to access the web, but for some reason they do not recognize each other as being connected to the hub (they dont connect to each other). I had them networked successfully before but I had to restore a computer. I forgot how to make it work again. One computer is a Windows 98 platform while the other is XP. If someone could tell me how to get them working together I would worship your feet! Thanks! =)
 

·
Registered
Joined
·
22,468 Posts
The basics for troubleshooting are:

1. Make sure you have the same IP scheme (e.g. 192.168.0.x).

2. Make sure you have the same Subnet Mask, Gateway, and DNS IP addresses.

3. Make sure you can ping the other computer's IP address. If this fails, make sure you turn of XP's firewall.

4. Make sure you can ping the other computers by name.

5. Make sure you have the same workgroup name (watch for trailing spaces)

6. For troubleshooting purposes, turn off XP's and any other firewall software. You can always add more complexity after you get it working.

7. With XP, make sure you have the same username and password as the person logging onto the other computers. The default setting for XP Pro is to require a password for network access.

8. More details about how to network XP can be found at:
http://www.onecomputerguy.com/networking/xp_network.htm

9. More details about how to troubleshoot TCP/IP networkcs can be found at:
http://www.onecomputerguy.com/networking/trouble.htm

10. Apply the registry edit to fix the browsing delay from XP to Win9x computers
http://www.onecomputerguy.com/windowsxp_tips.htm#browsing_delay.

There continues to be a lot of misinformation about needing NetBEUI or to changing the NetBIOS setting. You can ignore both. Installing NetBEUI to solve a networking problem will just mask a some underlying and potentially important misconfiguration with TCP/IP. The default NetBIOS setting works fine so there is not need to change that either.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top