Tech Support Guy banner
Status
Not open for further replies.
1 - 11 of 11 Posts

·
Registered
Joined
·
66 Posts
Discussion Starter · #1 ·
The PC has Windows XP installed and it is allready in a network with acces on the Net.

These Days i have made a new Network with a Fileserver and a Workstation, no Internet there. I want to install the PC in the new network but at the same time keep the old network instalation and Internet for this one.

Can i install 2 Network Cards in 1 PC and have it working in 2 domains?

thanx in advance, tell me if you need any other info.
 

·
Registered
Joined
·
125 Posts
Seems like your question is actually 2 questions.

1. Can I install 2 NICs? - Yes you can.

2. Can I have it joined to 2 domains? = No. You can only be a member of 1 domain at a time.
 

·
Super Moderator
Joined
·
82,234 Posts
I agree with TheDude555, but am curious about you having a domain on the "new Network with a Fileserver and a Workstation." That sounds like two computers and you want to add a third, and you are going to have (or already have) a domain implemented there?

Of course, I am assuming that you are using domain as Microsoft does, as in "XP Pro can join a domain but XP Home cannot."
 

·
Registered
Joined
·
66 Posts
Discussion Starter · #4 ·
Yes i inted to add a domain in my Existing Network atm, but i want to be able to work with the user of this computer with out removing him from the allready existing ERP.

there is olso a question Number 3. Can i have him in the first network, and with a diferent NiC and a crosswhire cable conect him with 1 PC of the new network?
 

·
Super Moderator
Joined
·
82,234 Posts
"there is olso a question Number 3. Can i have him in the first network, and with a diferent NiC and a crosswhire cable conect him with 1 PC of the new network?"

Yes (if "crosswhire" means "cross-over").
 

·
Registered
Joined
·
66 Posts
Discussion Starter · #7 ·
"(if "crosswhire" means "cross-over")" Yeap, i will have to remember to slap my English teacher about this.
So, the recomentent action is. To keep the PC1 to the old network, and Connect it with 1 PC of the new Network.

Question Number 4. How can i connect the 2 PCs without using a Workgroup since the PC1 will be in the old Workgroup and the new one will be in the new one.

Anyone has ever tried it? any suggestions instructions or anything else?
 

·
Super Moderator
Joined
·
82,234 Posts
Connect the 2 PCs with a cross-over cable (can use regular cable if either port is auto-sensing). If you use the default dynamic IP, each PC will be assigned by Windows an APIPA of 169.254.x.y. This connection will be easier to use if you assign static IPs; e.g., 10.1.1.10 and 10.1.1.20, mask = 255.255.255.0. Of course, don't use the same subnet as used by your other networks.

Then launch a Windows Explorer window showing the other PC's shares via

Start - Run - \\otherPC - OK

where "otherPC" is the IP address or the Computer name of the other PC. Using IP address always works (unless blocked by firewall or there is corruption) and Computer name often works.
 

·
Registered
Joined
·
775 Posts
true.. crossover cables can be sweet when your in a jam. I had to use one in the past, becuase my cdr drive was broken on a notebook pc and I wanted to do a windows install. So connected the rj45 crossover to another notebook, and manually entered a 169... ip in tcp/ip settings on each pc, and shared my cd (drive d) drive from the other computer, and successfully installed windows that way.
 
1 - 11 of 11 Posts
Status
Not open for further replies.
Top