I am having a problem with my USB 2.O ports freezing my computer when I try to run my wireless adapter. When I use my USB 1.1 hub the system will not freeze however it is much slower than the 2.0. Is there any thing I can do so I can use the 2.0?
USB 2.0 freezes USB 1.1 DOES NOT
-
Please click the link below for your operating system to download the TSG SysInfo Utility. Click on "Save File" then double-click the file to run it. Copy and paste the report in your initial post. Windows 7 and later (downloads a file named tsginfo.exe) | Windows XP (downloads a file named SysInfo.exe)
- Status
1 - 3 of 3 Posts
Joined
·
266 Posts
Make/brand/year of the PC, Hubs, and wireless adaptor please. I can't help without enough information.
If you have the Mother Board drivers that came with the puter, do see if there is an installer for the USB 2.0 drivers included.
Remove the cords of n e USB devices that you have connected to your puter.
Then try to reinstall the drivers for the USB controller from here:
Go to start>settings>control panel>system>hardware>device manager>Universal Serial Bus Controlers.....and see if you have n e 'splats' : red/yellow/X icons on n e of the devices.
If so....highlite the device>click on remove>apply>ok.....then exit the panel and then restart your puter.
This will allow windows to reinstall said devices.
Good luck.
Remove the cords of n e USB devices that you have connected to your puter.
Then try to reinstall the drivers for the USB controller from here:
Go to start>settings>control panel>system>hardware>device manager>Universal Serial Bus Controlers.....and see if you have n e 'splats' : red/yellow/X icons on n e of the devices.
If so....highlite the device>click on remove>apply>ok.....then exit the panel and then restart your puter.
This will allow windows to reinstall said devices.
Good luck.
1 - 3 of 3 Posts
- Status
Join the discussion
