[goodwin24]

whenever i plug my usb hub in and set it up, it will work fine... untill i come to turn my pc on again. at this point it takes about ten minutes to get past the start-up screen showing you the info of the pc.
i am running on MicroSoft Windows XP
i have a Compaq Evo D510 SFF.
can someone please help me!
thanks in advance - jay

 

[Ash_11]

this might help:

http://support.microsoft.com/default.aspx?scid=kb;en-us;830957&Product=winxp

 

[goodwin24]

thankyou for the effort but when i followed microsofts instructions it did nothing.

 

[goodwin24]

can anyone help me with this issue?

 

[Triple6]

Have you contacted Compaq? It might be a known issue, its a hardware issue for sure. Is it only a problem with teh hub attached or with a device atatched to it? Try connecting only one device at a time. You can also check in the BIOS setup that it is not set to boot any other devices other then the hard drive - there may be an option to boot other devices. Also check for BIOS updates on Compaq's website - it might have been addressed in one.

 

[goodwin24]

Thankyou for your help. I have not contacted Compaq and I have never downloaded anything from Compaq's website. I will try and sort it out like you have said but no garauntee that it will!
thanks again
Jay =D

 

[goodwin24]

HELP. Can anyone help me with this problemo?????

 

[JohnWill]

As was previously mentioned, this is obviously a hardware or Compaq specific error. You'll most likely have to deal with Compaq to solve it.

 

[goodwin24]

It is to do with the http://support.microsoft.com/defaul...7&Product=winxp but it is along these lines but not exactly on them. I have the same trouble with my other PC???