Tech Support Guy banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
Status
Not open for further replies.
1 - 11 of 11 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter · #1 ·
Hi there, anyone can solve my problem?
Im using Aztech DSL 705E Modem.
I need to renew my public IP address through CMD command easily.
Previously im using some other model of Aztech modem, able to do so... but now unable.
This modem got selection on LAN setting = DHCP Mode [Disable/Server/Relay Agent]

Could anyone senior here please do guide me to make it possible?

Current setting :
HTML:
Windows IP Configuration

        Host Name . . . . . . . . . . . . : indranx-home
        Primary Dns Suffix  . . . . . . . : 
        Node Type . . . . . . . . . . . . : Unknown
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter streamyx:

        Connection-specific DNS Suffix  . : 
        Description . . . . . . . . . . . : VIA Rhine II Fast Ethernet Adapter
        Physical Address. . . . . . . . . : 00-19-DB-67-84-73
        Dhcp Enabled. . . . . . . . . . . : No
        IP Address. . . . . . . . . . . . : 192.168.1.2
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : 192.168.1.1
        DNS Servers . . . . . . . . . . . : 202.188.1.5
                                            202.188.0.132
Regards,
Indranx
 

·
Super Moderator
Joined
·
74,137 Posts
The 192.168.1.2 address shown in your IPCONFIG listing is your private LAN IP address, not your public IP address. To find out your public IP address, use your browser to visit a site like www.whatismyip.com and it will tell you the address.

EDIT: You would need to see if your ISP and the modem support the modem operating as a bridge. In this case a computer with DHCP enabled and connected directly to the modem would be assigned a public IP address. To renew your public IP address you would use the following two commands:

IPCONFIG /RELEASE
IPCONFIG /RENEW
 

·
Registered
Joined
·
30 Posts
Discussion Starter · #3 ·
The 192.168.1.2 address shown in your IPCONFIG listing is your private LAN IP address, not your public IP address. To find out your public IP address, use your browser to visit a site like www.whatismyip.com and it will tell you the address.
Yea, 192.168.1.2 is private IP. I want to renew Public IP through CMD.
I know the "Check Public IP" on browser & modem status.

Rasdial /DISCONNECT worked but,
Rasdial mynetwork myaccount [email protected] not connect and says,

HTML:
C:\Documents and Settings\Indran>rasdial mynetwork [email protected] [email protected]

Remote Access error 623 - The system could not find the phone book entry for thi
s connection.

For more help on this error:
        Type 'hh netcfg.chm'
        In help, click Troubleshooting, then Error Messages, then 623

C:\Documents and Settings\Indran>
Code:
mynetwork = my network name
myusername = broadband account details
[email protected] = broadband account password
 

·
Super Moderator
Joined
·
74,137 Posts
I always thought of the RASDIAL command as being used for dial-up, not DSL connections but I may have been mistaken.

By any chance is your new modem internally handling the PPPoE authentication while your old modem needed the computer to handle the PPPoE authentication?
 

·
Super Moderator
Joined
·
74,137 Posts
Does your new modem offer the option to disable the internal PPPoE authentication and have the computer handle it.

This is a little bit beyond my DSL and networking knowledge and you may wish to see if any one else here may step in and offer some other type of solution for you.
 

·
Super Moderator
Joined
·
43,946 Posts
how about connecting to 192.168.1.1 in the browser and see if you can do that way (if it's available)

Note that the chance of getting a new public IP is low due to the DHCP servers and it's least times etc.
 

·
Registered
Joined
·
30 Posts
Discussion Starter · #8 ·
Does your new modem offer the option to disable the internal PPPoE authentication and have the computer handle it.

This is a little bit beyond my DSL and networking knowledge and you may wish to see if any one else here may step in and offer some other type of solution for you.
how about connecting to 192.168.1.1 in the browser and see if you can do that way (if it's available)

Note that the chance of getting a new public IP is low due to the DHCP servers and it's least times etc.
Please see screenshot below :-


By indranx at 2010-12-30

By indranx at 2010-12-30

By indranx at 2010-12-30

By indranx at 2010-12-30

I don't know how to check it PPPoE Authentication method selection.
 

·
Super Moderator
Joined
·
43,946 Posts
I would assume it will be in the WAN section. But if it is PPPoE I would thought that you would had to statically give it an ip address since it's a A/DSL connection, but I could be wrong.

Just out of interest, why do you need to change the public IP address?
 

·
Registered
Joined
·
30 Posts
Discussion Starter · #10 ·
I would assume it will be in the WAN section. But if it is PPPoE I would thought that you would had to statically give it an ip address since it's a A/DSL connection, but I could be wrong.

Just out of interest, why do you need to change the public IP address?
I need to renew Public IP because, my downloading reach to daily limits. So need to renew Public IP to get through. There are some continuesly download program able to use IF i have the renew batch file. So firstly i have to make sure my Network Card can renew through via CMD.
 
1 - 11 of 11 Posts
Status
Not open for further replies.
Top