Tech Support Guy banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Prior to changing my OS from Windows 2000 Server to Windows ME (software incapibility issues), I had 2 internal HDD. Now, only one is visible.

I have Adaptec Ultra 160 SCSI controllers

I have used the SCSISelect software (option on bootup), and found the following:
There are Channels A & B. When I run the utility on Channel A, these are my findings:
AIC-7899 at Bus: 01h; Device: 02h; Channel A
SCSI ID #7: Adaptec AIC-7899
Host Adapter SCSI ID 7
SCSI Parity Checking enabled
Host Adapter SCSI Termination enabled
BIOS Info:

IRQ Channel 05
I/O Port DC00h
SCSI Termination level 0

When I run the utility on Channel B, these are my findings:
AIC-7899 at Bus: 01h; Device: 02h; Channel B
SCSI ID #6: Adaptec AIC-7899
Host Adapter SCSI ID 6
SCSI Parity Checking enabled
Host Adapter SCSI Termination enabled
BIOS Info:

IRQ Channel 11
I/O Port D800h
SCSI Termination level 0

Can anyone help me configure these settings to utilize the send HDD?
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top