Tech Support Guy banner
Status
Not open for further replies.
1 - 9 of 9 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
I recently decided to switch back to Vista after using the Win7 RC version for several weeks, due to problems with my USB devices that I couldn't figure out how to resolve.

So I ended up having to reformat my laptop, which I wasn't happy with at all.

So I go about reinstalling Vista, get everything set up, and I'm instantly confronted with several problems. One, my resolution is stuck at 1024x786, instead of the 1366x678 I previously had, with no option to change it. Two, I have no internet and the diagnostics tells me that my hardware isn't even properly installed.

I go to device manager and there are several things flagged with an exclamation point, which leads me to assume that I'm missing some drivers. I go to the resource and utilities CD, but I really have no idea what to download and what not to. I also can't seem to find my adapter driver anywhere on the CD.

I just want my laptop back to the way it was before I was dumb enough to not put Win7 on a separate partition.

Help, anyone?
 

·
Registered
Joined
·
8,450 Posts
What make and model?
It sounds like a Dell. The resource CD will identify the installed hardware and provides instructions for reinstalling the drivers.
I don't have one handy, but look at the tabs across the top for something like "Drivers" and switch to it. You can't do any harm as it won't install a wrong driver.
 

·
Registered
Joined
·
7 Posts
Discussion Starter · #5 ·
I'm having to download the drivers off of another computer, but here's my problem. The whole reason that I reformatted my drive was because all of my USB devices stopped working. Apparently, Windows 7 was having issues with them.

I'm discovering that the problem still exists. If I plug in a new USB device, I get blue screened. I'm so frustrated I don't know what to do.
 

·
Registered
Joined
·
8,450 Posts
I know there have been problems with Vista and USB, but you've got to start by getting all your drivers installed.
Put the CD in, if it doesn't auto run, just rt-click it to install.
That will put it on your program menu and install the drivers in C:/Dell/Drivers/Driver Numbers
You can then auto install each driver from the menu.
If you have a recovery partition, you can also go that route.
Take your time-it's not all that hard.
 

·
Registered
Joined
·
7 Posts
Discussion Starter · #7 ·
Update time.

So, I seem to have finally got my drivers in order. My remaining problem is the reason why I reformatted in the first place: my USB ports.

Everytime I plug in my external HD or my flash drive in any port, I get a BUGCODE_USB_DEVICE blue screen of death. However, my mouse is a USB device and it seems to be working just fine. I'm at a loss as to what this problem could be and how to fix it. Ideas?
 
1 - 9 of 9 Posts
Status
Not open for further replies.
Top