Hi, olenpriit. 
Welcome to TSG.
Please read this post completely. It may make it easier for you if you print, or copy and paste this post to a new text document for reference later.
This will likely be a few steps process in removing the malware that has infected the system. I encourage you to stick with it and follow my directions as closely as possible so as to avoid complicating the problem further.
Download ComboFix from Here or Here. to your Desktop.
Please download Brute Force Uninstaller to your desktop.
Save it in the same folder you made earlier (c:\BFU).
Do not do anything with these yet!
![]()
Please download ATF Cleaner by Atribune.
This program is for XP and Windows 2000 only
For Technical Support, double-click the e-mail address located at the bottom of each menu.
![]()
Download AVG Anti-Spyware from HERE and save that file to your desktop.
This is a 30 day trial of the program
Now copy these instructions to notepad and save them to your desktop. You will need them to refer to in safe mode.
Boot into Safe Mode:
Restart your computer and as soon as it starts booting up again continuously tap F8. A menu should come up where you will be given the option to enter Safe Mode.
Perform the following steps in safe mode:
Restart back into Windows normally now.
Please go HERE to run Panda's ActiveScan
Welcome to TSG.
Please read this post completely. It may make it easier for you if you print, or copy and paste this post to a new text document for reference later.
This will likely be a few steps process in removing the malware that has infected the system. I encourage you to stick with it and follow my directions as closely as possible so as to avoid complicating the problem further.
Download ComboFix from Here or Here. to your Desktop.
Please download Brute Force Uninstaller to your desktop.
- Right click the BFU folder on your desktop, and choose Extract All
- Click "Next"
- In the box to choose where to extract the files to,
- Click "Browse"
- Click on the + sign next to "My Computer"
- Click on "Local Disk (C: ) or whatever your primary drive is
- Click "Make New Folder"
- Type in BFU
- Click "Next", and Uncheck the "Show Extracted Files" box and then click "Finish".
Save it in the same folder you made earlier (c:\BFU).
Do not do anything with these yet!
This program is for XP and Windows 2000 only
Double-click ATF-Cleaner.exe to run the program.
Under Main choose: Select All
Click the Empty Selected button.
- Click Firefox at the top and choose: Select All
Click the Empty Selected button.
NOTE: If you would like to keep your saved passwords, please click No at the prompt.
- Click Opera at the top and choose: Select All
Click the Empty Selected button.
NOTE: If you would like to keep your saved passwords, please click No at the prompt.
For Technical Support, double-click the e-mail address located at the bottom of each menu.
This is a 30 day trial of the program
- Once you have downloaded AVG Anti-Spyware, locate the icon on the desktop and double-click it to launch the set up program.
- Once the setup is complete you will need run AVG Anti-Spyware and update the definition files.
- On the main screen select the icon "Update" then select the "Update now" link.
- Next select the "Start Update" button, the update will start and a progress bar will show the updates being installed.
- Once the update has completed select the "Scanner" icon at the top of the screen, then select the "Settings" tab.
- Once in the Settings screen click on "Recommended actions" and then select "Quarantine".
- Under "Reports"
- Select "Automatically generate report after every scan"
- Un-Select "Only if threats were found"
Now copy these instructions to notepad and save them to your desktop. You will need them to refer to in safe mode.
Boot into Safe Mode:
Restart your computer and as soon as it starts booting up again continuously tap F8. A menu should come up where you will be given the option to enter Safe Mode.
Perform the following steps in safe mode:
IMPORTANT: Do not open any other windows or programs while AVG Anti-Spyware is scanning, it may interfere with the scanning proccess:- Lauch AVG Anti-Spyware by double-clicking the icon on your desktop.
- Select the "Scanner" icon at the top and then the "Scan" tab then click on "Complete System Scan".
- AVG Anti-Spyware will now begin the scanning process, be patient this may take a little time.
Once the scan is complete do the following: - If you have any infections you will prompted, then select "Apply all actions"
- Next select the "Reports" icon at the top.
- Select the "Save report as" button in the lower left hand of the screen and save it to a text file on your system (make sure to remember where you saved that file, this is important).
- Close AVG Anti-Spyware .
- Start the Brute Force Uninstaller by doubleclicking BFU.exe
- Behind the scriptline to execute field click the folder icon
and select alcanshorty.bfu
![]()
- Press Execute and let the program do its job. (You ought to see a progress bar if you did this correctly.)
- Wait for the complete script execution box to pop up and press OK.
- Press exit to terminate the BFU program.
- Double click combofix.exe and follow the prompts.
- When finished, it shall produce a log for you. Post that log and a HiJackthis log in your next reply
Restart back into Windows normally now.
Please go HERE to run Panda's ActiveScan
- Once you are on the Panda site click the Scan your PC button
- A new window will open...click the Check Now button
- Enter your Country
- Enter your State/Province
- Enter your e-mail address and click send
- Select either Home User or Company
- Click the big Scan Now button
- If it wants to install an ActiveX component allow it
- It will start downloading the files it requires for the scan (Note: It may take a couple of minutes)
- When download is complete, click on My Computer to start the scan
- When the scan completes, if anything malicious is detected, click the See Report button, then Save Report and save it to a convenient location.
3
