Please click the link below for your operating system to download the TSG SysInfo Utility. Click on "Save File" then double-click the file to run it. Copy and paste the report in your initial post. Windows 7 and later (downloads a file named tsginfo.exe) | Windows XP (downloads a file named SysInfo.exe)

Tell a bad processor?

1049 Views 6 Replies 4 Participants Last post by Mr. PC Doc, Apr 7, 2004

n79ford

Discussion Starter · Apr 7, 2004

Just wondering have a computer that i am building, i plug/install everything and turn it on. All fans kick on and what not. Dosnt sound like the hard drive is kicking on but there is no video. I took the card out put it in a working system and it was working alright. Ideas? So would it be a burnt out processor?

AMD Athlon 2600
64meg DDR Nvidia
40gig Maxtor Harddrive
512 SDram
Abit Kt-7 raid board

This will just be a server system nothing special.

Save

Status: Not open for further replies.

1 - 1 of 7 Posts

Rockn

· #5 · Apr 7, 2004

CPU heatsink and fan installed correctly? Unplug everything from the motherboard...ribbon cables, all cards except video, disconnect power to all the drives and try again. Did you also place the motherboard standoffs on the backplane correctly so they correspond to only the screw holes in the motherboard? If not you may have shorted the motherboard to the case.

Save

1 - 1 of 7 Posts

Status: Not open for further replies.

Top Contributors this Month