Tech Support Guy banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
36 Posts
Discussion Starter · #1 ·
I have assembled a computer from spare parts to give away as part of a service club donation. Up untill recently the computer was progressing fine.

However I have a serial mouse that is messing up the screen with garbage after about 10 min after bootup

O assume this means an IRQ problem conflict with the mouse and the display adaptor.

What can I do to solve such?
This would be my first time changing IRQ settings

Specs are as follows:
MFG=homebuilt from spare parts
OS =win98se
133 mz processor
so far only 32 mb ram
 

·
Super Moderator
Joined
·
37,537 Posts
Hiya

First off, lets have a look at your IRQ list.

Go to Start | Run and type MSINFO32
On the left choose Hardware Rescources, then IRQs. Copy/paste the list here.

Regards

eddie
 

·
Registered
Joined
·
36 Posts
Discussion Starter · #3 ·
eddie5659 said:
Hiya
First off, lets have a look at your IRQ list.
Go to Start | Run and type MSINFO32
On the left choose Hardware Rescources, then IRQs. Copy/paste the list here. Regards eddie
Eddie,
Allways wondered how to copy the IRQ list -thanks!

1 Standard 101/102-Key or Microsoft Natural Keyboard
2 Programmable interrupt controller
3 Communications Port (COM2)
4 Communications Port (COM1)
5 (free)
6 Standard Floppy Disk Controller
7 Printer Port (LPT1)
8 System CMOS/real time clock
9 IRQ Holder for PCI Steering
9 S3 Trio64V+ PCI (765)
10 Creative Sound Blaster PCI128
10 IRQ Holder for PCI Steering
11 Modem Master 9250
11 IRQ Holder for PCI Steering
12 (free)
13 Numeric data processor
14 Primary IDE controller (dual fifo)
14 Intel 82371SB PCI Bus Master IDE Controller
15 Secondary IDE controller (dual fifo)
15 Intel 82371SB PCI Bus Master IDE Controller

Happy to say that the problem has disappeared for no apparent reason -but I still would like to hear what you have to say about the above

Bill
 

·
Super Moderator
Joined
·
37,537 Posts
Glad to hear its working okay. If you want to mark this one Solved, just click Thread Tools at the top, and select it from the list ;)

As to the list, you have two IRQ slots free, which is good as you can add more hardware without a conflict happening, hopefully.

One of the famous conflict can be if the modem is sharing with the graphics/sound card. From what I can see, it all looks healthy to me :)

eddie
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top