Tech Support Guy banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter · #1 ·
i have 2 comps both on xp home. first is connected to dsl , i installed another Ethernet card and connected to second comp with 'crossover cable' both say connected with no (!)'s . but when open status window "sent" shows packets and "received" shows "0" packets. this is on both machines.

never tried to so any network stuff before. probably just my error but don't know.

any help please......... :confused: :confused: :confused: :confused:
 

·
Registered
Joined
·
272 Posts
could be the hardware issue. Can you ping each other?
 

·
Registered
Joined
·
1 Posts
blin said:
could be the hardware issue. Can you ping each other?
Hi,

1. XPpro DELL Desktop with Ethernet using netgear router works fine, No connection Problem

2. XPpro ibm Thinkpad600e - Netgear wireless card 16-bit ma01 - works fine no connection problems
IP- 192.168.0.1;

3. XPpro Dell Latitude CPI laptop Netgear wireless card 54-bit WR511 -
Good signal strength, but cannot access the internet;
ip: 192.168.0.103???
Default Gateway - doesn't display
I've heard I'd have to setup an IP range (192.168-0.1 thru 192-168.0.4) on the desktop router. Is there a site that can walk me through my type of setup?
thanks.
Mike
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top