Please click the link below for your operating system to download the TSG SysInfo Utility. Click on "Save File" then double-click the file to run it. Copy and paste the report in your initial post. Windows 7 and later (downloads a file named tsginfo.exe) | Windows XP (downloads a file named SysInfo.exe)

SATA hard disk controller

962 Views 3 Replies 4 Participants Last post by crjdriver, Jan 12, 2007

vkilljoy

Discussion Starter · Jan 12, 2007

Dear friends,

recently, I have some problems with a new hard disk I bought (SATA). I thought that my mobo had a sata controller but it did not. So, I bought a new PCI card and I connected my hard disk to it. Everything was fine but after a week some errors appeared and when my PC started it showed that it could not recognize the hard disk.
Then I thought it might be the controller and I replaced it with another one (different brand). Again things were fine for 2-3 weeks when sometime - again - during startup, my PC could not recognize the hard disk (showing the same errors).
The status now is that sometimes it recognizes the hard disk and sometimes not. This is very annoying !
Do you have any ideas what might be wrong ? Is it possible the second PCI SATA controller card being defective ?
Thanks in advance for your comments.

Save

Status: Not open for further replies.

1 - 1 of 4 Posts

crjdriver

· #4 · Jan 12, 2007

You may have a drive with a problem. What controller card did you install? There are a lot of cheap ones on the market. Good brands are promise, highpoint, siig, and adaptec.

Save

1 - 1 of 4 Posts

Status: Not open for further replies.

Top Contributors this Month