Tech Support Guy banner
Status
Not open for further replies.
1 - 8 of 8 Posts

· Registered
Joined
·
1,064 Posts
Discussion Starter · #1 ·
Hi,

I have a small LAN and in some PC I have installed both ACROREADER 5 and 7.
The weird thing happening is that when I send a document to print, the outlines, borders are coming out fine, but the text is uncomprehensible, like a bunch of mixed lines, what could be the problem?
thank you
 

· Registered
Joined
·
1,064 Posts
Discussion Starter · #4 ·
I don't think that woud work, see, the problem is with any size of files, the frames come out correctly but the text does not...
is it possible that a printer might have a problem? maybe a problem with the firmware?
 

· Registered
Joined
·
896 Posts
Hi,

This is a quote from the web site which several large ( up to 15mb ) PDF files I had major problems printing came from

start quote

Problems Printing PDF Files

On some occasions, particularly when printing large documents, pages that you have printed may be incomplete or patchy, or your printer returns an "out of memory" message and does not print the complete document. Setting the Print as image option in the Print dialog box could fix these problems. If you still get a problem when printing a large document, set the Print as image option but print the document in parts instead of all at once. Use the Print Range options in the Print dialog box to do this. Also make sure that your printer properties shows the correct amount of memory installed on the printer.

end quote

The best solution I found to this was to downgrade my work computer back to Adobe Acrobat Reader 5.

It was a very satisfying day when our I.T. department actually and finally agreed that I was right and the computer(s) they had given me could not print large PDF files properly using versioon 6.

Dealing with Health and Safety documents I had made a very strong argument that I needed to be able to print accurate and complete copies of documents I received.

Since back on version 5 I have had absolutely no problems. Even >200 A4 sized page documents print properly. On version 6 paragraphs could be missing anywhere in the document.

My work computer is a p4 2.8 with only 256 RAM running XP Pro SP 2.

Problem solved.

hth

Ceri
 

· Registered
Joined
·
1,064 Posts
Discussion Starter · #6 ·
thanks, but as I have mentioned above, my problem concerns all sizes of pdf documents
 

· Registered
Joined
·
587 Posts
number said:
when I send a document to print, the outlines, borders are coming out fine, but the text is uncomprehensible, like a bunch of mixed lines, what could be the problem?
thank you
What resolution are you printing at? I don't know if this will help but I sometimes have problems printing - either getting rubbish like you or with the text printed in huge letters with just a few lines per A4 page. I've always been able to solve this by re-printing the page but at a higher resolution (ie 300 or 600 dpi rather than the default 150dpi...I can do this easily because I've saved print options with each of these settings as well as postscript options as separate 'printer' choices in the print dialogue box). If I do this then the page has always printed out correctly.

I went back to Adobe 5 because 7 caused many problems.
 
1 - 8 of 8 Posts
Status
Not open for further replies.
Top