Tech Support Guy banner
Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Hello

I am new to this board, but not computers. I am currently studying for my A+ Certification and it's coming along well. I have looked in my A+ booklet to see if I can find an answer to my question and I am coming up empty handed. Maybe somebody here can help me out.

I have a situation with the BIOS setup on my computer. I want to go into my BIOS so I can set up my HDs for a Master/Slave. My problem is, once I get into the BIOS setup, it stays there. It will not let me go into the setup and change anything. It would not let me Control+Alt+Delete to reboot either. I don't think the screen is frozen cause the "time" is still running. I have a Gateway 450MHz that I bought 3 years ago. I just can't figure out how to get past this "frozen" BIOS setup screen. Any suggestions on how I can bypass this or fix it?

I have just bought a 40GB Western Digital HD that I want to make into my Master and take my old 10GB and make it into a Slave for bulk storage. I only have less than 1000mb left on my old 10 Gigger.

Any help would be greatly appreciated.
Dragonetti
 

·
Account Disabled
Joined
·
1,240 Posts
You need to set the jumpers on the drivers for Master/Slave first. What makes you think the BIOS screen is frozen? You won't likely be able to use a mouse. You have to use the keyboard. Try the arrow keys. Look along the bottom of the screen for the key to press to save the settings. It's usually F10 or ESC.
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #3 ·
Max,

I know in the BIOS you have to use the keyboard. I have worked in BIOS setup to configure Master/Slave on other computers and never had any problems. It seems my BIOS Setup will not work with the keyboards, it won't allow me to do a warm boot. I have went into my BIOS just now to play with it again and see if anything changed. Still nothing works, the F10 does not work, arrows don't work, nothing. I had to shut down my computer and do a cold boot just to get out of the BIOS Setup.
 

·
Registered
Joined
·
2,617 Posts
:cool: Are you entering the BIOS from a cold boot and and pressing the delete, F1 or F2 keys during the boot process?
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #6 ·
Max,

You gave me something to think about and I did some playing around. My keyboard is a Logitech keyboard with a USB connection. I have used the adapter that connects to the USB to make it a PS/2 to be able to use it for my normal computer use. So what I did was take off the PS/2 adapter and put the keyboard into the USB slot and check the BIOS setup and it worked. Thanks for your assistance.

Another thing is I can't keep the keyboard on the USB connection cause it won't work for my normal Windows use. USB works for my BIOS setup, and PS/2 works for my normal computer use. not vice verse. It's no biggie, now I know if I have to go into my BIOS setup I have to put my keyboard into my USB port.

Thanks,
Dragonetti
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top