Tech Support Guy banner
Status
Not open for further replies.
1 - 1 of 1 Posts

· Registered
Joined
·
125 Posts
Discussion Starter · #1 ·
Hello, ive had no problems so far with regards to copying dvds, but yesterday i decrypted a dvd with DVD Shrink and then went it went to burn it using DVD Shrink i got an error saying it could not copy but all my decrypted files were at a certain location.

I thought this could have been a faulty blank dvd, but ive just gotten the same error again so i tried to burn using nero. I got the following Error, i dunno if anybody can make anything out of the error.

I hope somebody can help, thanks.

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 18:18:06
Nero version: 6.3.0.2
Recorder: <AOPEN DUW1608/ARR> Version: A060 - HA 1 TA 1 - 6.3.0.2
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SONY DVD-ROM DDU1613 >Version: 9YS2 - HA 1 TA 0 - 6.3.0.2
Adapter driver: <atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y120L0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6B200P0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY DVD-ROM DDU1613 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AOPEN DUW1608/ARR atapi Port 1 ID 1 DMA: On
OtherPeripheral : Promise RAID Console 1.00 fasttx2k Port 3 ID 4 DMA: Off

=== CDRom-Device-Map ===
SONY DVD-ROM DDU1613 E: CDRom0
AOPEN DUW1608/ARR F: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1022MB (1047280kB)
Free physical memory: 621MB (636780kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

2.2.2005
UDF/ISO compilation
19:28:01 #1 Phase 112 File dlgbrnst.cpp, Line 1800
DVD-Video files reallocation started

19:28:01 #2 Phase 114 File dlgbrnst.cpp, Line 1800
DVD-Video files reallocation completed (no file modified)

19:28:01 #3 Text 0 File Isodoc.cpp, Line 6029
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

19:28:01 #4 Phase 111 File dlgbrnst.cpp, Line 1800
DVD-Video files sorted

19:28:01 #5 Text 0 File Reader.cpp, Line 118
Reader running

19:28:01 #6 Text 0 File Writer.cpp, Line 124
Writer AOPEN DUW1608/ARR running

19:28:01 #7 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

19:28:01 #8 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

19:28:01 #9 Text 0 File Burncd.cpp, Line 3101
Turn on Disc-at-once, using DVD media

19:28:26 #10 Text 0 File DlgWaitCD.cpp, Line 240
Last possible write address on media: 2297887 (510:38.37, 4488MB)
Last address to be written: 2286121 (508:01.46, 4465MB)

19:28:26 #11 Text 0 File DlgWaitCD.cpp, Line 245
Write in overburning mode: FALSE

19:28:26 #12 Text 0 File DlgWaitCD.cpp, Line 2085
Recorder: AOPEN DUW1608/ARR, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

19:28:26 #13 Text 0 File DlgWaitCD.cpp, Line 406
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Dual Layer.)

19:28:26 #14 Text 0 File ThreadedTransferInterface.cpp, Line 779
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286122 (2286122) = #2286122/508:1.47
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286122 blocks [AOPEN DUW1608/ARR ]
--------------------------------------------------------------

19:28:26 #15 Text 0 File ThreadedTransferInterface.cpp, Line 948
Prepare recorder [AOPEN DUW1608/ARR ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681977856, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286122 | lead-out | 1 | 0x00 | 0x41

19:28:26 #16 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

19:28:26 #17 Text 0 File Burncd.cpp, Line 4073
Cache writing successful.

19:28:26 #18 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

19:28:26 #19 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 8x (11,040 KB/s)

19:28:26 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2264
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19:28:26 #21 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 14:10,277 (850277ms) -> OK

19:28:26 #22 Text 0 File DVDR.cpp, Line 1512
Recording mode: Sequential Recording Mode

19:28:26 #23 Text 0 File Mmc.cpp, Line 19451
Set BUFE: JustLink -> ON , JustSpeed : ON

19:28:26 #24 Text 0 File DVDR.cpp, Line 1643
Start write address at LBA 0
DVD high compatibility mode: Yes

19:28:26 #25 Text 0 File Cdrdrv.cpp, Line 7941
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

19:36:34 #26 SCSI -1135 File Cdrdrv.cpp, Line 1431
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03300000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x16 0xBD 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x03 0x00 0x16 0xBB 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x00

19:36:34 #27 CDR -1135 File Writer.cpp, Line 301
Write error

19:36:34 #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

19:36:34 #29 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

19:36:34 #30 Text 0 File DVDR.cpp, Line 1847
EndDAO: Last written address was 1490175

19:36:42 #31 SCSI -1135 File Cdrdrv.cpp, Line 1171
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x16 0xBB 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x00

19:36:42 #32 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

19:36:42 #33 CDR -1135 File WriterStatus.cpp, Line 164
Write error

19:36:42 #34 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

19:36:42 #35 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

19:36:42 #36 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 8x (11,040 KB/s)

Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 29/08/2002 11:27:50 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top