Please click the link below for your operating system to download the TSG SysInfo Utility. Click on "Save File" then double-click the file to run it. Copy and paste the report in your initial post. Windows 7 and later (downloads a file named tsginfo.exe) | Windows XP (downloads a file named SysInfo.exe)

PC Turning On Issue

1598 Views 15 Replies 7 Participants Last post by spdykat, Jan 14, 2005

mattym

Discussion Starter · Jan 12, 2005

When trying to turn on my pc, it doesnt turn on, i push the power button the system turns on as if power, CPU fan starts up and all, but there is no BEEP, and monitor stays off, it just hangs there and thats it. you have to turn it off the turn back on for a few time (it varies really can take 1 min to 30 min) then it might beep and turn on. Could it be an issue with RAM.. i put in a 512mb (pc2700) and a 512mb (pc3100), could this be the issue? but before u answer that if i remove any RAM stick it still does the same thing? what could be the problem?

Save

Status: Not open for further replies.

1 - 1 of 16 Posts

otoe1

· #7 · Jan 12, 2005

...."i put in a 512mb (pc2700) and a 512mb (pc3100), could this be the issue?"

First off, find out the actual type of memory that your motherboad wii support....can not run different type's'

Unplug your puter from the back (power supply) then open the case and remove the battery. Doing so will reset the BIOS to default settings. Let it set no less than 10 minutes. I have let mine on occassions set like this over nite.

Then install the battery and hook up the power cord and go from there.

Never attempt to 'flash' the BIOS unless you know what the ramifications are.

Good luck.

Save

1 - 1 of 16 Posts

Status: Not open for further replies.

Top Contributors this Month