Please click the link below for your operating system to download the TSG SysInfo Utility. Click on "Save File" then double-click the file to run it. Copy and paste the report in your initial post. Windows 7 and later (downloads a file named tsginfo.exe) | Windows XP (downloads a file named SysInfo.exe)

PC Turning On Issue

1603 Views 15 Replies 7 Participants Last post by spdykat, Jan 14, 2005

mattym

Discussion Starter · Jan 12, 2005

When trying to turn on my pc, it doesnt turn on, i push the power button the system turns on as if power, CPU fan starts up and all, but there is no BEEP, and monitor stays off, it just hangs there and thats it. you have to turn it off the turn back on for a few time (it varies really can take 1 min to 30 min) then it might beep and turn on. Could it be an issue with RAM.. i put in a 512mb (pc2700) and a 512mb (pc3100), could this be the issue? but before u answer that if i remove any RAM stick it still does the same thing? what could be the problem?

Save

Status: Not open for further replies.

1 - 1 of 16 Posts

beanmaster1

· #11 · Jan 12, 2005

Sounds like interrim connections on one or more components. Try securing all the cable points, especially power, and all the cards as well. Also check and see if any jumpers have been tripped or if any of the componenetd have fused (the metal legs will appear to have melted onto the board)

Save

1 - 1 of 16 Posts

Status: Not open for further replies.

Top Contributors this Month