Please click the link below for your operating system to download the TSG SysInfo Utility. Click on "Save File" then double-click the file to run it. Copy and paste the report in your initial post. Windows 7 and later (downloads a file named tsginfo.exe) | Windows XP (downloads a file named SysInfo.exe)

No boot

898 Views 10 Replies 5 Participants Last post by DeLorean, Jan 18, 2007

gimbi

Discussion Starter · Jan 18, 2007

I've got a PC that won't boot. No OS, no POST, nothing except running fans. I have an identical PC here that boots fine, and all jumper settings are identical. Any thoughts? Thanks ahead of time

Save

Status: Not open for further replies.

1 - 2 of 11 Posts

It would help us if you would include some system specs, make and model of system or Motherboard, Processor, Ram, Video, HDD's Optical drives, added cards such as Network cards, etc and OS. Also is thisw a new build or has it run before? Was it running before then wouldnt run when you started it again?

Save

dustyjay

· #10 · Jan 18, 2007

Is this an IBM prebuilt system? It sounds as though it might be. What you describe sounds a lot like a bad power supply. Just because a few fans spin and a few lights light up does not mean that the power supply is capable of operating the system. According to a search of the IBM site this came with a 185W Power Supply and onboard video, a 40gB hdd possibly a CDRW and Floppy drive.

Save

1 - 2 of 11 Posts

Status: Not open for further replies.

Top Contributors this Month