Tech Support Guy banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi all and Happy new Year !!!

I need some help with an error I keep getting randomly, the last 3 days..
Its a BCCode: 124 which I believe is hardware (or/and) temperature related right?
It follows:

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033

Additional information about the problem:
BCCode: 124
BCP1: 0000000000000000
BCP2: FFFFFA8007B74028
BCP3: 00000000BA000000
BCP4: 0000000000400405
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:\Windows\Minidump\010111-35381-01.dmp
C:\Users\.....\WER-39390-0.sysdata.xml

My computer hardware is:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Ultimate , 64 bit
Processor: Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz, Intel64 Family 6 Model 26 Stepping 5
Processor Count: 8
RAM: 6135 Mb
Graphics Card: ATI Radeon HD 5800 Series, 1024 Mb
Hard Drives: C: Total - 199996 MB, Free - 162296 MB;
D: Total - 953867 MB, Free - 323164 MB;
E: Total - 350000 MB, Free - 208718 MB;
F: Total - 753870 MB, Free - 126048 MB;
G: Total - 49999 MB, Free - 45413 MB;
H: Total - 315401 MB, Free - 155514 MB;
J: Total - 1430796 MB, Free - 686771 MB;
K: Total - 953867 MB, Free - 61363 MB;
L: Total - 953867 MB, Free - 126600 MB;
Motherboard: ASUSTeK Computer INC., Rampage III Extreme, Rev 1.xx, 106642990000494
Antivirus: ESET NOD32 Antivirus 4.2, Updated and Enabled

All drivers are the latest ones.

Whocrashed:
On Sat 1/1/2011 12:50:05 PM GMT your computer crashed
crash dump file: C:\Windows\Minidump\010111-35381-01.dmp
This was probably caused by the following module: hal.dll (hal+0x12903)
Bugcheck code: 0x124 (0x0, 0xFFFFFA8007B74028, 0xBA000000, 0x400405)
Error: WHEA_UNCORRECTABLE_ERROR
file path: C:\Windows\system32\hal.dll
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Hardware Abstraction Layer DLL
Bug check description: This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
This is likely to be caused by a hardware problem problem. This problem might be caused by a thermal issue.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time.

I will also include the dmp file. Can someone plz help me !!??? Which component is at fault? Or most probably which component gets heated? Thanks in advance !!!

http://attachments.techguy.org/attachment.php?attachmentid=184985&stc=1&d=1293888588
 

Attachments

·
Super Moderator
Joined
·
82,234 Posts
Shall I also post this in the hardware section?
No. If you post multiple threads on the same topic we cut off your fingers. Well, not really, but we do close duplicate threads when they are reported or we find them.

The proper thing to do if you think that another forum is better is to click on Report at the bottom of one of your posts and request the thread to be moved.

In this case I do guess that Hardware may be better, so I am going to move your thread. If you want it moved back to Windows 7 just hit Report and so request. Good luck.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top