Ok, I'll do my best. First, uninstall any software that you installed for this...you don't need it, and often it doesn't work. Next, power down the router and modem, then disconnect router cable from modem.
Power on modem, and if possible, press its' reset button if it has one (Might have to search for it...it could be a little hole that you stick a pen point into etc). Make sure once this is done that the usual connection light come on etc. Power it off again.
Now, use ONE computer as the main router admin link...connect the PC to the router, and the router to the modem, making sure you connect the cable from the modem to the WAN port on the router. Then power on in THIS order...the modem first, wait until all lights are on, then power on the router, press its' reset button, and wait until it lights up normally (you wont get an 'internet' light tho..not configured yet), THEN power on the PC.
Now, open a web browser, and in the address bar, type 192.168.1.1 and you should get the router set-up window asking for the login and pass. Leave the users field empty, and the password is admin (lowercase), and then click ok. You should now be on the setup page.
Now fill in the required details as needed, including the host name/domain name (especially for cable ISP's).
Now, to be honest, you can follow the guidelines in the manual. If you don't have it, you can get it from HERE. Just select the model, and follow instructions. If you sill have problems, come back and ask us.
Scorp.
Power on modem, and if possible, press its' reset button if it has one (Might have to search for it...it could be a little hole that you stick a pen point into etc). Make sure once this is done that the usual connection light come on etc. Power it off again.
Now, use ONE computer as the main router admin link...connect the PC to the router, and the router to the modem, making sure you connect the cable from the modem to the WAN port on the router. Then power on in THIS order...the modem first, wait until all lights are on, then power on the router, press its' reset button, and wait until it lights up normally (you wont get an 'internet' light tho..not configured yet), THEN power on the PC.
Now, open a web browser, and in the address bar, type 192.168.1.1 and you should get the router set-up window asking for the login and pass. Leave the users field empty, and the password is admin (lowercase), and then click ok. You should now be on the setup page.
Now fill in the required details as needed, including the host name/domain name (especially for cable ISP's).
Now, to be honest, you can follow the guidelines in the manual. If you don't have it, you can get it from HERE. Just select the model, and follow instructions. If you sill have problems, come back and ask us.
Scorp.
