Please click the link below for your operating system to download the TSG SysInfo Utility. Click on "Save File" then double-click the file to run it. Copy and paste the report in your initial post. Windows 7 and later (downloads a file named tsginfo.exe) | Windows XP (downloads a file named SysInfo.exe)

Monitor

2004 Views 6 Replies 3 Participants Last post by griffinspc, Dec 27, 2006

CB80

Discussion Starter · Dec 26, 2006

When Hooking-up My Computer To The Monitor, The Monitor Shows A Message: "monitor Is In Power Mode - Activate Using Pc". What Does This Mean And How Do I Activate The Monitor Using My Pc?

Save

Status: Not open for further replies.

1 - 3 of 7 Posts

griffinspc

· #2 · Dec 26, 2006

CB80 said:
Activate Using Pc".

Most monitors have a message of some sort when not getting a signal from the PC. I have to ask, did you power up the PC and did it work?

Save

Hmm... Sorry, maybe I wasn't clear enough. Did you try to turn the PC on and if so when you did that did the PC boot all the way to the Windows desktop? If it did then when you shut it down that message should appear for a few seconds and then disappear. As kiwiguy said that's a normal state unless power is interrupted. If the PC did not boot up (start) then we need to know that too and if so I suspect it may be as simple as the monitor plugged in to the wrong connector or something worse of course.

Save

griffinspc

· #7 · Dec 27, 2006

Glad you found it, don't be a stranger if you need something more. You can mark the thread closed by clicking on the Thread Tools link at the top.

Save

1 - 3 of 7 Posts

Status: Not open for further replies.

Top Contributors this Month