Please click the link below for your operating system to download the TSG SysInfo Utility. Click on "Save File" then double-click the file to run it. Copy and paste the report in your initial post. Windows 7 and later (downloads a file named tsginfo.exe) | Windows XP (downloads a file named SysInfo.exe)

Monitor problem, horizontal pincushion

4657 Views 5 Replies 2 Participants Last post by philip kirkham, Jan 16, 2005

Dakota00

Discussion Starter · Jan 15, 2005

Hey Guys,

I picked up a new computer, I'm having problems adjusting the 17" flat screen (CRT) monitor. I'm getting horizontal pincushion on the whole screen, it's not bad but it's enough to piss you off . I've tried everything to fix this, but there's no direct setting on the screen for adjustment. Is this a common thing that happens with flat screen CRT's??

Any help would be great, otherwise this monitior is going back.
Thanks,
Anthony

Save

Status: Not open for further replies.

1 - 3 of 6 Posts

philip kirkham

· #2 · Jan 15, 2005

To assist the experts at this site you will probably have to supply a bit more info i.e. Make and model of the monitor, also what your system is cpu, graphics card, memory etc, if you have another monitor see if it will work with the pc, and then check with the experts on how to change the system to a standard VGA setup to see if that will work, or at least if you get another monitor to work, see if the new monitor is supported and if not try on-line for a driver.
phil

Save

philip kirkham

· #4 · Jan 15, 2005

have you tried another monitor?

Save

philip kirkham

· #6 · Jan 16, 2005

And your OS is?

On the other monitor did you see if the OS for the PC supported the new monitor?

have you tried safe mode when booting up (F5 / F8) do you see any text at all when starting the pc etc.

phil

Save

1 - 3 of 6 Posts

Status: Not open for further replies.

Top Contributors this Month