Please click the link below for your operating system to download the TSG SysInfo Utility. Click on "Save File" then double-click the file to run it. Copy and paste the report in your initial post. Windows 7 and later (downloads a file named tsginfo.exe) | Windows XP (downloads a file named SysInfo.exe)

Monitor/mouse/keyboard not turning on with pc after switching ram sticks

164 Views 1 Reply 2 Participants Last post by PeterOz, 4 mo ago

jadez

Discussion Starter · 4 mo ago

So I have an ASRock B450M-HDV and with a AMD Ryzen 5 2600 six core processor and a AMD Radeon RX 480 graphics card with XPG ADATA RAM 16 GB (2x8 GB) DDR4 3000 installed. I tried switching RAM because my pc was having lots of random crashes even after i upgraded to a 1 tb ssd. i installed a new ram that is compatible with motherboard and cpu which was the Crucial RAM 16GB (2x8GB) DDR4 3200MHz, and when i go to turn on my pc the monitor is not turning on with it, my keyboard and mouse also don’t turn on. Ive tried switch HDMI cables, reseating the graphics card, reseating the cmos battery, and so many other things. any other suggestions? also is it worth it to take it somewhere to get it repaired or should i just get a new motherboard?

Save

1 - 2 of 2 Posts

PeterOz

· #2 · 4 mo ago

If you switch the old ram back does it boot?

jadez said:
i installed a new ram that is compatible with motherboard and cpu which was the Crucial RAM 16GB (2x8GB) DDR4 3200MHz,

The specs here disagree https://www.amd.com/en/products/cpu/amd-ryzen-5-2600.

jadez said:
I tried switching RAM because my pc was having lots of random crashes

Why do you say the ram caused the crashes. Did you run any test to check the ram

Save

1 - 2 of 2 Posts

Top Contributors this Month