Tech Support Guy banner
Status
Not open for further replies.
1 - 2 of 2 Posts

· Registered
Joined
·
1,647 Posts
Using Jamstudio?

If the driver privided by the installation CD doesn't work, or the tablet doesn't seem to be working - do this (if it's plugged on by USB):
Go to the control panel via the start menu/settings. Then to add new hardware. The computer should run a search to see if anything is connected. The tablet should come up in the end. Select it and click on next. It should say that it's installed but might also say that some file/program of your operating system can't load the selected driver (most likely the KBJam studio one). Next step, select a diferent driver. The computer will probably run a search for the best driver and the one Jam studio provides will probably come up again for the best choice. Instead, click on the button allowing u to select other suitable drivers. You should have a driver like Human Interface Device driver - select it and finish the process. The tablet should be working now (the green light on it might indicate that) - and it works with pretty much anything (i.e. Flash 5, PSP, even games, etc), You don't need the included software.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top