Tech Support Guy banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
62 Posts
Discussion Starter · #1 ·
hey everyone, i just recently bought a d-link 514 2.4ghz wireless router. I have 2 computers one which i used as pretty much the base computer and i directly wired the router to it since its close to the cable modem, and the other computer i set up with a wireless link. The computer with the wireless link runs at great interent and download speed, but for somereason on the computer that is wired to the router the bandwith when using things like WinMX has dropped from like 30,000 to 5000, is there any reason i could fix this so both computers could be running at good speeds with good bandwith...or does anyone know why this is happening? any and all replys are appreciated thanks.. :confused:
 

·
Registered
Joined
·
62 Posts
Discussion Starter · #3 ·
the setup is as follows, the desktop is wired to the router via the first port in the 4 port switch with cat5, and the cable modem is wired through to the router through the port that it is sposed to be in. So in other words that computer is connected through the first port on the router, and i also have one computer connected to the router via wireless.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top