Tech Support Guy banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I have Hp computer and linksys wireless adapter Linksys wusb54g V.4 that is conected to a linksys wireless router and says it has very good conection. But when I open enternet explorer it says it connot display the webpage. I did try run>CMD> and nothing was there. from the looks on linksys sight it is suposed to have ip adress and lots of other info. I also ran diagnose connection problem and it said "Ip corrupted routing table". this problem started last night when I hooked up the new internet service provider and it worked perfect before that. Thanks for reading and I suck at spelling and drinking some beer trying to cool off from trying to fig out this two day stright internet problem :mad: Please help thanks.
 

·
Retired Moderator
Joined
·
106,726 Posts
Please supply the following info, exact make and models of the equipment please.

Name of your ISP (Internet Service Provider).
Make and exact model of the broadband modem.
Make and exact model and hardware version of the router (if a separate unit).
Make and exact model and hardware version of any other network equipment, like a repeater, a booster, hi-gain antenna, etc.
Model numbers can usually be obtained from the label on the device.
Connection type, wired or wireless.
If wireless, encryption used, (none, WEP, WPA, or WPA2)
Version and patch level of Windows on all affected machines, i.e. XP (Home or Pro), SP1-SP2-SP3, Vista (Home, Business, Ultimate), etc.
The Internet Browser in use, IE, Firefox, Opera, etc.

Please give an exact description of your problem symptoms, including the exact text of any error messages.

  • If you're using a wireless connection, have you tried a direct connection with a cable to see if that changes the symptoms?
  • For wireless issues, have you disabled all encryption on the router to see if you can connect that way?
  • Have you connected directly to the broadband modem to see if this is a router or modem/ISP issue?
  • If there are other computers on the same network, are they experiencing the same issue, or do they function normally?

On any affected computer, I'd also like to see this:

Hold the Windows key and press R, then type CMD (COMMAND for W98/WME) to open a command prompt:

Type the following commands on separate lines, following each one with the Enter key:

PING 206.190.60.37

PING yahoo.com

NBTSTAT -n

IPCONFIG /ALL

Right click in the command window and choose Select All, then hit Enter.
Paste the results in a message here.

If you are on a machine with no network connection, use a floppy, USB disk, or a CD-RW disk to transfer a text file with the information to allow pasting it here.
 

·
Registered
Joined
·
145 Posts
I must admit I made a lucky guess and nothing else. No thanks necessary. If anyone should be thanked here, it should be JohnWill for taking the time to write such a large post which offered lots of information and suggestions for you.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top