Please click the link below for your operating system to download the TSG SysInfo Utility. Click on "Save File" then double-click the file to run it. Copy and paste the report in your initial post. Windows 7 and later (downloads a file named tsginfo.exe) | Windows XP (downloads a file named SysInfo.exe)

Intel Motherboard wont install RAID Drivers

970 Views 2 Replies 2 Participants Last post by zgrillo2004, Jan 17, 2007

zgrillo2004

Discussion Starter · Jan 17, 2007

I have a Intel® Desktop Board D975XBX2 Motherboard. I put on 4 250GB SATA300 HDs in my Computer. My problem is that when I insert my floppy disk when windows tells me to insert the RAID Drivers Floppy in. it tells me that the CD or Floppy could be damaged. we checked the floppy and it works fine. I also read that there is a problem with the Intel® Desktop Board D975XBX2 not recognizing the Drives. My connections are under Blue SATA Connectors. the OS is not installed so I cant give you the info. Any Ideas?

Save

Status: Not open for further replies.

1 - 1 of 3 Posts

crjdriver

· #2 · Jan 17, 2007

The blue ones are the sil controller I believe. What driver are you attempting to load?
Have you entered the raid bios and created the array?
From your manual any drive connected to the sil controller must be in raid. Non-raid drives are not supported.

Save

1 - 1 of 3 Posts

Status: Not open for further replies.

Top Contributors this Month