Please click the link below for your operating system to download the TSG SysInfo Utility. Click on "Save File" then double-click the file to run it. Copy and paste the report in your initial post. Windows 7 and later (downloads a file named tsginfo.exe) | Windows XP (downloads a file named SysInfo.exe)

Installed New RAM. Compatible with old?

2925 Views 5 Replies 4 Participants Last post by 325isbimmer, Jan 16, 2007

325isbimmer

Discussion Starter · Jan 16, 2007

I purchased a 1GB stick of RAM from MemoryTen for my LG LS50 which previously had 256MB.
I just added the 1GB stick to the empty slot for a total of 1280MB. Is it Ok to have it like this. normally you see 2 x 512 or 2 x 1024. comp seems to run great now with that added 1024 but am I slowing it down by having that small chip in aswell.

what are your thoughts?

Thanks

Save

Status: Not open for further replies.

1 - 1 of 6 Posts

crjdriver

· #4 · Jan 16, 2007

I disagree a little. If it is the system in your sig, then you will loose dual channel capability. While the system should run better with the extra memory, it would run even better if you used dual memory controllers. This is only possible [with amd systems] with memory of matched size, speed, etc.

Save

1 - 1 of 6 Posts

Status: Not open for further replies.

Top Contributors this Month