Please click the link below for your operating system to download the TSG SysInfo Utility. Click on "Save File" then double-click the file to run it. Copy and paste the report in your initial post. Windows 7 and later (downloads a file named tsginfo.exe) | Windows XP (downloads a file named SysInfo.exe)

IDE Channel no 80 conductor cable installed...memory check won't work? GQ 3121.

23010 Views 20 Replies 8 Participants Last post by DaFOBulous1, Jan 20, 2005

DaFOBulous1

Discussion Starter · Jan 14, 2005

I was one of the crazy insane people who went to Fry's early in the morning and picked up those $99 computers. It had a 40 GB hard-drive so I replaced with a 160GB Maxtor. Then I noticed it gave me a IDE Channel no 80 conductor cable installed after it detected my HD and then booted as normal. Will it affect my performance?

Another thing I noticed is at times, after it detect my CPU at the bootup, it would hang and suddenly be at the Windows XP loading screen. It saids something like Sempron 2200+ CPU detected... Then where it should continue to do a memory check and detect my HD and DVD, it doesn't do that and freezes there.

I hope it's just a the memory and not the motherboard. I do notice it's VERY slow at times...slower than my 1GHz or even the P3s I use to have. Of course it only had 128MB RAM which I will upgrade VERY soon. Could that be the source of the slowness or could it affect it THAT much?

Any help is appreciated.

Save

Status: Not open for further replies.

1 - 1 of 21 Posts

gotrootdude

· #15 · Jan 19, 2005

You'd get crashes running windows if the memory was bad.. I believe it's just dreadfully low on memory, and having to use virtual memory/ swap space on the hard drive.. This is killing it's performance, more so if the drive is badly fragmented and of the slower 5200rpm variety.

Save

1 - 1 of 21 Posts

Status: Not open for further replies.

Top Contributors this Month