Tech Support Guy banner

IDE Channel no 80 conductor cable installed...memory check won't work? GQ 3121.

23007 Views 20 Replies 8 Participants Last post by  DaFOBulous1
I was one of the crazy insane people who went to Fry's early in the morning and picked up those $99 computers. It had a 40 GB hard-drive so I replaced with a 160GB Maxtor. Then I noticed it gave me a IDE Channel no 80 conductor cable installed after it detected my HD and then booted as normal. Will it affect my performance?

Another thing I noticed is at times, after it detect my CPU at the bootup, it would hang and suddenly be at the Windows XP loading screen. It saids something like Sempron 2200+ CPU detected... Then where it should continue to do a memory check and detect my HD and DVD, it doesn't do that and freezes there.

I hope it's just a the memory and not the motherboard. I do notice it's VERY slow at times...slower than my 1GHz or even the P3s I use to have. Of course it only had 128MB RAM which I will upgrade VERY soon. Could that be the source of the slowness or could it affect it THAT much?

Any help is appreciated.
Status
Not open for further replies.
1 - 2 of 21 Posts
For $99 a speed demon is not going to be what you get. Still maybe somethings can be improved. More RAM will make a difference. As far as the message do you have a 80 wire IDE cable or 40? Same end connectors. It can affect your performance.
With the IDE cable that you have hooked up make sure that all connections are tight. You might want to try a different cable and if you do make sure it is the 80 wire type. The connectors on the 80 wire are colored (black,blue and gray)
1 - 2 of 21 Posts
Status
Not open for further replies.
Top