Tech Support Guy banner
Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I want to have a little LAN party for 6 people. But I have a problem. I have two different routers one is newer than the other. Both are Linksys routers. The newer one has a WAN, 4 ports, and Uplink in the back. The other older version has an Internet and 4 ports. How would I set this up so 6 computers can connect to each other and play video games?
 

·
Super Moderator
Joined
·
82,234 Posts
Welcome, SierrA MisT.

You want JohnWill's popular post:

Connecting two SOHO broadband routers together.

Configure the IP address of the secondary router to be in the same subnet as the primary router, but out of the range of the DHCP server in the primary router. For instance DHCP server addresses 192.168.0.2 through 192.168.0.100, I'd assign the secondary router 192.168.0.254 as it's IP address.

Disable the DHCP server in the secondary router.

Setup the wireless section just the way you would if it was the primary router.

Connect from the primary router's LAN port to one of the LAN ports on the secondary router. If there is no uplink port and neither of the routers have auto-sensing ports, use a cross-over cable. Leave the WAN port unconnected!
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #5 ·
Thanks all for the information and help. I've figured out how to do a LAN now and it wasn't all that complicated as I originally thought. Again I appreciate all the help and information that was given to me.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top