Tech Support Guy banner
Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
120 Posts
Discussion Starter · #1 ·
I have a Compaq Presario 5320 US, XP Pro, 768 MB Ram 1.5 GHz CPU. It works fine until I shut it down. Then I get a Black Windows screen that says "It is now safe to turn off your computer" I have updated the bios. Anyway to fix this so I don't have to manually press the button to power it off at that point?

Thank you
 

·
Gone but Never Forgotten
Joined
·
17,735 Posts

·
Registered
Joined
·
120 Posts
Discussion Starter · #3 ·
Thanks for your previous assistance!.
As a result I think I am narrowing down the problem.
My computer specs. Says this about Compatibility/Compliance
• Advanced Configuration and Power Interface (ACPI)
However, when I go to the device manager under Computer it says
Standard PC. I'm pretty sure that it should say ACPI Uniprocessor PC
Any suggestions / opinions?
Thank you.
 

·
Gone but Never Forgotten
Joined
·
17,735 Posts
Hi, I am not sure that System Restore would bail you out of a bad change in that area....I have tried going FROM Standard Pc to ACPI and crashed badly before...mine is ACPI and most I have worked on are. The one time I changed from ACPI, it was supposed to be set that way, and changing to Standard was not good!

I would hope that if a problem resulted, you would be able to boot to at least Safe Mode, or Last Known Good Configuration to revert a change that goes badly. Mostly the BIOS can be set, as you have seen, but some are just not changeable there....it has no effect, when you run win2000 and XP. The setting in Device Manager and Power Management does, it overrides the BIOS from what I have read and seen.

You will know right away when you boot up, I think yes, I would try to change that setting.

I have used the Presario model you listed, and checked in Compaq support, here is the page about Power Management settings it calls correct for your PC:

http://h10025.www1.hp.com/ewfrf/wc/...oduct=93212&rule=36566&dest_page=product#N641

Then, working back from that above page, you see:

http://h10025.www1.hp.com/ewfrf/wc/...3212&query=Presario 5320 US&dest_page=product

http://h10025.www1.hp.com/ewfrf/wc/...sario 5320 US&product=93212&dest_page=product

http://h10025.www1.hp.com/ewfrf/wc/...io+5320+US&cc=us&dlc=en&dest_page=product[/b]

http://h10025.www1.hp.com/ewfrf/wc/siteHomeC?lc=en&cc=us

http://welcome.hp.com/country/us/en/support.html?pageDisplay=support

http://www.hp.com/

So, you start at the HP home page, and then the support page, look down page for "Compaq Presario, etc" go to the main Compaq area, type in Presario 5320 US and go to your model's support. From there, it's called
"look around" meaning, try under categories, generally "Solve a Problem" works well, and there is Search feature that finds lots of extra good info, that does not show in just the plain support.

There is a lot of info there, and also down the page in Related Topics.....best of luck.
 

·
Registered
Joined
·
265 Posts
Hi,
I had this problem on one of my PC's. To get around this I went to Control Panel, Power Options, Then in the power options box that has opened, click the "APM" tab and put a check in the "Enable Advanced Power Management Support" box. Apply and hopefully everything is now OK.
I'm no expert, and I don't have a Compaq but this worked for me
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top