Tech Support Guy banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter · #1 ·
I just got a PNY XLR8 GTX 460 (Overclocked) card for Christmas. I installed it fine (with a new OCZ Fata1ity 550watt power supply), and was testing out the graphics on it by playing a high res game. It performed beautifully for several hours before the card started overheating. After looking at it a few times, I found that this was due to the fan not working properly (as in going very slowly). I ran MSI Afterburner to monitor the fan speeds, and it shows that the card starts at around 1600rpm (set at about 40% fan speed), as the card heats up, the fan starts spinning slower and slower until it reaches about 100rpm even though the card appears to be reporting 70% fan speed. The card proceeds to heat up fairly quickly and has reached 90°C when I shutdown the system to avoid damage.

Is this something that might be fixed by tweaking the card's BIOS, or is there likely a problem with the card in which case I should get it replaced?

Thanks,
~Alex
 

·
Registered
Joined
·
143 Posts
try this and report back the temps at idle. http://www.techpowerup.com/downloads/1907/TechPowerUp_GPU-Z_v0.4.9.htmlIf you can, post a screen shot. Make sure screenshot the sensor page.

Also this
Download Speedfan http://www.almico.com/sfdownload.php (The download link is somewhere in the center of the page) and install it. Once it's installed, run the program and post here the information it shows.
The information I want you to post is the stuff that is presented on the main screen. It will show temperatures and voltage readings.
To make sure we are getting all the correct information it would help us if you were to attach a screenshot

To do a screenshot click on the "Print Screen" or the "Prt scr" button on your keyboard.
* It is normally the key above your number pad between the F12 key and the Scroll Lock key
* Now go to Start and then to All Programs
* Scroll to Accessories and then click on Paint
* In the Empty White Area press and hold the CTRL key and then press the V key
* Go to the File option at the top and click on Save as
* Save as file type JPEG and save it to your Desktop
* Attach it to your next reply
 

·
Registered
Joined
·
33 Posts
Discussion Starter · #3 ·




Oddly enough the screenshots came out a little blurry...sorry about that. The first is after 50 mins or so of the computer being on and idle, and was taken at a point where the fan actually stopped completely for about half a second (one reporting the speed at 0rpm and the other at 30rpm). The second screenshot was taken when I was actually using the computer after about 5 mins or so (you can see the card heated up really fast).
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top