Tech Support Guy banner
Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I have read numerous posts on this problems and have done a few things recommended to correct the problems. Display and color were fine a few days ago. Turned PC on and display was in 800 x 600. Corrected it in control panel/display/settings. Now text and screens seem bigger, especially on Internet. Colors displayed on monitor (like blue) are different, not crisp, like they usually are. I can change color to 256, high color (16 bit), and true color (24 bit) in display settings - has no effect on color.

Card in pc is 9FX Reality 334, I have right clicked My Computer and checked device status and it says it is working properly. I have checked out monitor and unplugged and plugged back in cable to video card in PC.

I run Windows 95 on a Pentium II, MMX, 96 MB Ram.
I have ran out of options - any suggestions?
 

·
Registered
Joined
·
9,396 Posts
hi tj........the colour scheme your getting......is it kinda like the one you get in safe mode?
try booting into safe mode and see....also check device manager ,make sure the correct card is listed....if so,try uninstalling your graphics card,shut down,take the card out and make sure the dust is cleaned away and then make sure its correctly seated in the slot(maybe try another pci slot).......(thats if its not on-chip graphics,then im steering you in the wrong direction)
re-boot and let windows re-install the card....have the driver disk ready.
come back and let us know what happens.
good luck
 

·
Registered
Joined
·
12,041 Posts
If you need drivers, you can download some here

Sorry that link is deader than a door nail, will try to find another

Number 9 went out of business I beleive

This is the only driver I can find

Manufacturer:
Number Nine

Device Type:
Video Adapters

Model:
Reality 334

File Name:
Number Nine Reality 334 Beta Video Adapter Driver for Windows 98.exe

Size:
223744 bytes

OS:
Windows 98

Comments:
The docs said it is a beta driver for Windows 98. But, I could not find any other drivers for this adapter for Windows 98. I hope this will be stable and all that...too soon to tell yet.
http://www2.driverguide.com/uploads/uploads7/8067.html
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #5 ·
In safe mode color scheme is similar but everything is grainy, not clear. I have removed the card in device manager and took card in PC out, cleaned off a little and reseated card in same slot (only one available). Rebooted PC and reinstalled card.

Color problems still the same on blues, grays, and gray/black combinations.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top