-
Please click the link below for your operating system to download the TSG SysInfo Utility. Click on "Save File" then double-click the file to run it. Copy and paste the report in your initial post. Windows 7 and later (downloads a file named tsginfo.exe) | Windows XP (downloads a file named SysInfo.exe)
Fortinet switch voice vlan setup
Currently running a 48 port fortinet switch. S148FF-6.4.6-build0478
Im used to the cisco platform where a simple "switchport voice vlan" command would allow a port to tag voice traffic.
With this switch however, the command line is hard for me to grasp. The GUI is simple but im having trouble configuring the voice vlans.
I want all my voice traffic to be in vlan 3 and data traffic vlan 4.
There is the LLDP MED section where i configured a profile for voice vlan and it simply is not working when applied to the ports.
Ports are set to native vlan = 4 , allowed vlans = 3, 4 and untagged vlans = 4
Phone goes to switch and PC goes to phone. However, both devices operate on the native vlan. It seems the profile is not working.Maybe im doing it wrong. Does anyone here have experience with this type/model of switch?
Im used to the cisco platform where a simple "switchport voice vlan" command would allow a port to tag voice traffic.
With this switch however, the command line is hard for me to grasp. The GUI is simple but im having trouble configuring the voice vlans.
I want all my voice traffic to be in vlan 3 and data traffic vlan 4.
There is the LLDP MED section where i configured a profile for voice vlan and it simply is not working when applied to the ports.
Ports are set to native vlan = 4 , allowed vlans = 3, 4 and untagged vlans = 4
Phone goes to switch and PC goes to phone. However, both devices operate on the native vlan. It seems the profile is not working.Maybe im doing it wrong. Does anyone here have experience with this type/model of switch?
