Tech Support Guy banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
I've been getting the following messages on my Micron for more than a year:

A conflict has been detected between two drivers which claimed two overlapping Io port regions. Driver atapi, with device <\Device\ScsiPort2.Translated>, claimed an IO port range with starting address in data address 0x28 and 0x2c, and length in data address 0x30.

A conflict has been detected between two drivers which claimed two overlapping Io port regions. Driver imgatapi, with device <\Device\ScsiPort0.Translated>, claimed an IO port range with starting address in data address 0x28 and 0x2c, and length in data address 0x30.

Now they have been joined by a third:

The Messenger service hung on starting.

The hard disk and Zip work just fine, but my floppy is unreliable... and I can't find any documentation on the "Messenger" service.

Do I have a problem? If so, how can I fix it?

Thanks,
Mick
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top