[andyman1963]

hi guys.my mate who is a member has a problem.pc (packard bell 4 months old dual processor) crashed..tried to reboot using master dvd and he gets an message...Error 5 Glue Part 1 and 2 appeared just after the master dvd was read and after that there was a black screen saying c:/>. now the pc does not load up any further than the first black screen and he still gets this error every time he trys to reinstall xp please help if u know any way of fixing this

 

[john1]

Hi,
Looks like its some P.Bell proprietry garbage,
probably the start up diskettes that they want you to make
when you first use the machine.

******************
from:
http://forums.pcw.co.uk/thread.jspa?forumID=10&threadID=35192

thanks for the reply m8 a glue error is an error code that you get with packard bell pc when you try to do a back to factory settings on your pc i cant boot from cd because i have to use pak bells red floppy disk it works but when it asks for disk 1 it says glue error 5

******************

Dunno how you would get on trying to get them now.
Maybe a total re-install is a possibility,
see what others say before doing anything.

John

 

[BrotherPain]

Hello!

Believe itor not I've jsut been learning how to fix this. You need to re tattoo the DMI. I work for "The Tech Guys" in England. If you give me your serial number for the computer and the part number on the disk I should be able to help you through it. I know that sounds a bit dodgy, so 'll tell you the way it's done so hopefully you can trust me.

When you get the C: prompt type q: then enter
then type CD DRIVERS and enter
then type TATTOO/INTHSPRETEST and enter
then type TATTOO/CREATEDMIFROMHS and enter
then type CD.. and enter
then type EXTHS/RESTORE

now for the next piece of info you'll need to give me your seriel number and the number on the diskette or cd or dvd or whatever because I can use a bit of software that recalls all the details you need to make the Tattos match on all parts of your system.

Anyway, I hope this helps.

You can find out your seriel number on either the back of your PC or in a program called snapsys and it should tell you in there I think.

Hope this helps so far!

 

[andyman1963]

thanks for the reply.fault now fixed by a friend who used f11 to boot from cd.this info came from pak bell

 

[Zeanon]

Im having the same problem with the restore disks simply cannot get them to run. Have tried the F10 and F11 during boot with no success

The only thing thats changed on the PC is the hard drive, as the old one failed and is unusable. If anyone has a workaround for this i would be grateful of the solution, cannot find anything that works on the packard bell website.

Thanks in advance


Zeanon

 

[grandma77]

Im having the same problem with the restore disks simply cannot get them to run. Have tried the F10 and F11 during boot with no success

The only thing thats changed on the PC is the hard drive, as the old one failed and is unusable. If anyone has a workaround for this i would be grateful of the solution, cannot find anything that works on the packard bell website.

Thanks in advance

Zeanon

Maybe you should email BrotherPain who posted a couple of posts above this one.

 

[BLAIRMAN]

Hello!

Believe itor not I've jsut been learning how to fix this. You need to re tattoo the DMI. I work for "The Tech Guys" in England. If you give me your serial number for the computer and the part number on the disk I should be able to help you through it. I know that sounds a bit dodgy, so 'll tell you the way it's done so hopefully you can trust me.

When you get the C: prompt type q: then enter
then type CD DRIVERS and enter
then type TATTOO/INTHSPRETEST and enter
then type TATTOO/CREATEDMIFROMHS and enter
then type CD.. and enter
then type EXTHS/RESTORE

now for the next piece of info you'll need to give me your seriel number and the number on the diskette or cd or dvd or whatever because I can use a bit of software that recalls all the details you need to make the Tattos match on all parts of your system.

Anyway, I hope this helps.

You can find out your seriel number on either the back of your PC or in a program called snapsys and it should tell you in there I think.

Hope this helps so far!

 

[BLAIRMAN]

Can you help got so far but fell at the last fence here's some numbers for you
409502040239
7025720301

 

[BLAIRMAN]

Hello!

Believe itor not I've jsut been learning how to fix this. You need to re tattoo the DMI. I work for "The Tech Guys" in England. If you give me your serial number for the computer and the part number on the disk I should be able to help you through it. I know that sounds a bit dodgy, so 'll tell you the way it's done so hopefully you can trust me.

When you get the C: prompt type q: then enter
then type CD DRIVERS and enter
then type TATTOO/INTHSPRETEST and enter
then type TATTOO/CREATEDMIFROMHS and enter
then type CD.. and enter
then type EXTHS/RESTORE

now for the next piece of info you'll need to give me your seriel number and the number on the diskette or cd or dvd or whatever because I can use a bit of software that recalls all the details you need to make the Tattos match on all parts of your system.

Anyway, I hope this helps.

You can find out your seriel number on either the back of your PC or in a program called snapsys and it should tell you in there I think.

Hope this helps so far!

 

[Hijab]

I need help...

 

[Wendy1962]

Hi Ihave the same glue error on my laptop
Disc number 7404210201, SN 614600070235