Tech Support Guy banner
Status
Not open for further replies.
1 - 20 of 29 Posts

·
Registered
Joined
·
119 Posts
Discussion Starter · #1 ·
hi i am trying to makea network with my windows xp machine and my linux box (xandros) neither computer seems to show up to each other under the networks. i am using a $15 (canadain) ethernet switch to connect all the computers in my house (3). do i need a router to make a sucessful network or will my ethernet switch do?
 

·
Retired Moderator
Joined
·
110,551 Posts
If you're sharing the Internet, you want a router.
 

·
Registered
Joined
·
119 Posts
Discussion Starter · #5 ·
yes, i am sharing the internet but i also want them to be able to share files and printers. but i NEED a router? or can this be done with an ethernet switch im just trying to see why its not working with my current setup.
 

·
Super Moderator
Joined
·
44,287 Posts
You only need the router if you are going to have multiple computers needing internet access, unless you are using some kind of ICS.

Again, are your machines on the same subnet and network ID?
 

·
Registered
Joined
·
119 Posts
Discussion Starter · #7 ·
how do i check if they are in the same subnet and networl id? and what is an ethernet switch for then because i bought it and it works fine for sharing internet between computers but i cant seem to get a network going
 

·
Super Moderator
Joined
·
44,287 Posts
IPCONFIG /ALL in command line on all machines for Windows. IFCONFIG is for linux, unless your linux version is different.

Usually if you are using a 192.168.x.x IP Address the default subnet mask is 255.255.255.0
 

·
Registered
Joined
·
119 Posts
Discussion Starter · #9 ·
i did it on windows and the subnet mask is exactly what u said but on linux i couldnt do it because if config wasnt recognised as a command. but im pretty shure it is my ethernet switch or something because i was having network trouble before with a windows machine.
 

·
Super Moderator
Joined
·
44,287 Posts
Did you do if config or ifconfig? (the /all is for windows only)
I would consult a manual if available for the correct command

Also can you clarify what you meant by:

"neither computer seems to show up to each other under the networks. "

Or start from the beginning :D
 

·
Deceased Moderator Gone but never forgotten
Joined
·
82,272 Posts
Maybe it would help if you describe your current network. Using ICS on one computer to share internet? Or your ISP is giving multiple connections via the switch?

Can you post the ipconfig /all for the XP machine that you are trying to enable file and printer sharing?
 

·
Registered
Joined
·
119 Posts
Discussion Starter · #12 ·
i did ifconfig and when i said neither computer shows up under the networks i mean that the computers cannot see each other on the network
 

·
Super Moderator
Joined
·
44,287 Posts
Then it sounds like that your TCP/IP Infomation is incorrect.

Can you provide us with the information TerryNet mentioned as well as the TCP/IP info for the other machines.
 

·
Registered
Joined
·
119 Posts
Discussion Starter · #14 ·
ok... my isp gives me one internet connection that come out of a high speed modem via ethernet cable, this pluges into my ethernet switch, then an ethernet cable comes out of the ethernet switch to each computer that needs internet. how do i copy from the windows console? and i still couldnt get ifconfig to work on linux, and what is tcp/ip?
 

·
Super Moderator
Joined
·
44,287 Posts
OK, first off a switch cannot share the internet. Only a router can do that. This is probably where the problem lies. If you switch your switch for a router, and set the machines to automatically obtain IP addresses, then the computers should be on one network and be able to share the internet. As for your linux distro, you will need to consult the website for that. I'm just starting to learn linux and I have only used RedHat and Ferdora. Both uses the ifconfig command. I'm not too sure what it is for your distro.
 

·
Registered
Joined
·
119 Posts
Discussion Starter · #19 ·
ok thanx for all ur help and fast response
 

·
Super Moderator
Joined
·
65,965 Posts
doublehelix - do you have fixed IP's some ISP used to give fixed IP's to use
 
1 - 20 of 29 Posts
Status
Not open for further replies.
Top