Tech Support Guy banner
Status
Not open for further replies.
1 - 11 of 11 Posts

·
Registered
Joined
·
337 Posts
Discussion Starter · #1 ·
We have got Dell PowerEdge Rack Console 15FP, is connected to different servers.
I could not figure out what is the proper key that let us to switch between these different servers,,,,yes there is an option (F10) to logout from the console.

I tried PRINTSCREEN, it did not work
 

·
Registered
Joined
·
30 Posts
Ill be able to help you out with this, Im not showing 15fp as a poweredge server model number. Please clarify your model number or you may post your servicetag/express service code and I can look it up.
 

·
Registered
Joined
·
337 Posts
Discussion Starter · #3 ·
Please clarify your model number or you may post your servicetag/express service code and I can look it up.
Thanks for your help, all the information that i found is :

S/N CH04Y067-12963-3BE-0ETD,,,,,,REV A00,,,,,,,,,,,,,It is was very difficult to read the serail number, because it is in such cornet I could not see it properly
 

·
Registered
Joined
·
5,520 Posts
Howdy folks...

zillah...

Ya know unless I'm gravely misstaken ( and I could be :) ), this rack mount doesn't serve as a KVM switch ( everything I could find it was just a monitor and a keyboard ), you should have a seperate KVM switch somewhere...

Try double tapping the Scroll lock key, or the up and down arrow keys, or even maybe the scroll lock and the up or down arrow key...
 

·
Registered
Joined
·
337 Posts
Discussion Starter · #5 ·
this rack mount doesn't serve as a KVM switch
Yes it does have, because I have got one monitor and one key board and one mouse to switch between servers. If I power off the switch and power on again .
1- First I have to login to the console, if I want to logout I have to press F10.
2- After login to the console, I can see the list of servers, now if I choose one server , I will be stuck there , I can not switch to other serve, unless I have to power off the switch and power on it again.
 

·
Registered
Joined
·
5,520 Posts
That's interesting...

The Dell manuals I've looked at just showed it as a monitor and keyboard...

Have you tried the ESC key, or maybe ALT + ESC, CTRL + ESC?
 

·
Registered
Joined
·
1 Posts
You've probably already found a solution to your problem, but if not ours brings up the server selection list if you hit "print screen" - then you can arrow up or down the list to the server you want and press "enter" to select it.

Hope I didn't waste your time here.
 
1 - 11 of 11 Posts
Status
Not open for further replies.
Top