Cooler 4 pins at the wrong place?

I looked at the manual and it is just about useless. With dual fans, there should be a spliter for the fan pw and that goes on the cpu fan header. Both fans pw from the single header. From the manual, it shows the pump being connected to a sata type pw connector. This is pretty strange; all of the AIO type coolers I have seen have pump pw going to a AIO header on the motherboard. It is hard for me to understand how pump RPM is going to be monitored by using a sata pw connector......
Again the manual is useless.

FWIW I recommend coolermaster water cooling IF you really want water cooling.

What motherboard is it ?

managed said:

What motherboard is it ?

Click to expand...

Its an Asus rog strix z270h gaming, but i found the correct wire for the cpu fans, that part has been fixed but after booting there is a red light that keeps blinking.

any suggestions?

First of all, you need to list ALL of your exact system specs; ie exact cpu, exact pw supply, exact ram, etc, etc. Do not post "500W pw supply" Post the exact brand and model# Do that for ALL of your parts.
Next have you read the guide at the top of the forum for problem builds? If not, do so. If you follow ALL of the steps, you will find the cause of your problem.