Tech Support Guy banner
Status
Not open for further replies.
1 - 10 of 10 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
Hello,

I had been having a lot of problems upgrading my current computer. Now, everything is brand new except for the two old hard drives I am using. The computer does not start. It turns on, but I do not hear the usual clicks and beeps telling me it has started, I do not get the little green light on, and I do not get any visual display. What could be wrong, and how could I fix it? thank you,

Peter
 

·
Registered
Joined
·
1,100 Posts
Does the fan to the CPU spin?

The first thing to check is the memory. Is the "bank one" slot utilized? Are the memory sticks firmly seated?

Post back.
 

·
Registered
Joined
·
226 Posts
I'm assuming you've replaced everything inside your computer case. Have you double checked that all the Hard drive/video/port wires are firmly in place and checked with the manual that they are the correct way round?.

The slightest incorrect wiring can cause your system not to boot at all.
 

·
Account Disabled
Joined
·
1,222 Posts
Changing everything in your computer except for the hard drive is not called upgrading, it's called replacing. Basically, you have a new computer with an old hard drive.

Did you build this new system yourself? If so, check all the connections to make sure they're correct and seated tightly. If it still doesn't work, call someone who has built computers before to come over and take a look at things. If you don't know anyone, take the computer to a technician.
 

·
Registered
Joined
·
71 Posts
Have you tried rotating your hard drive cables? If the cables aren't the ones with the little lugs on so you can't put them in the wrong way, this will probably be the problem (although, covering my back, it might not definantly be the problem:) ).

Also, if you put the computer together, were you a silly boy and didn't use an anti-static band or mat? If you didnt you may have buggered your processer, ram, etc, etc, etc, etc, this may also cause those problems.

Are you hearing any bleeps from the computer? If you have a way of finding out, the bleep pattern relates to a certain problem (i think), this might be an idea if all else fails.
 

·
Registered
Joined
·
226 Posts
You say that everything is new except the hard drives? Correct?
What type of system are we talking about? motherboard, processor, ram, info please!
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #8 ·
I have a AMD 700, 512 RAM, 3 hard drives.... 400 Watt Power supply, DVD, chaintech motherboard, GeForce 64RAM video card.

I am getting no beeps whatsoever when I turn on my computer
 

·
Retired Administrator
Joined
·
103,703 Posts
Take out any add in cards except for the video card. Only connect one hard drive with the operating system on it, forget about the DVD drive for now.

If you have more than one ram chip, pull the others, reseat the cpu and video card. If the video card isn't AGP, try another slot.
 

·
Registered
Joined
·
226 Posts
A friend of mine had the same problem and it turned out that his amd Athlon 850 processor had not seated properly with the two mounts that connect to the motherboard. Remove those and reseat the processor if that works then you know what the problem is.:D
 
1 - 10 of 10 Posts
Status
Not open for further replies.
Top