Tech Support Guy banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
Status
Not open for further replies.
1 - 12 of 12 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter · #1 ·
I am a newbie..I was on pogo .com. Someone send me a free guess pass to club pogo. I opened up her e-mail she send me. I played for about an hour. Shut down my computer like i always do. The next day i went to pogo to play my games. I was playing for about a half and hour. I went to get a drink when i came back my screen was blank..I couldn't shut it down..The two yellow button on my tower stays on i know one is for power. The other one is when i am downloading it blinks.. But now it stays on all the time. I turned my pc off.When i turned it back on it's says insert systems disc.I don't have any disc. I am running win 98 SE. The computer was giving to me. Someone said it could be my mother board went bad..Or my hard drive went. If anyone can give me some advice thanks.....I hope you understand what i am trying to say. :(
 

·
Retired Moderator and Malware Specialist
Joined
·
18,549 Posts
What's the Operating System, Windows 98?

Meanwhile, open the computer's console. Check for lose cables such as Ribbon and power cables. Refresh their contact by removing the cables and reconnecting them. See if that makes a difference.

Also explain if at startup the BIOS logo is displayed. What happens afterwards?
 

·
Registered
Joined
·
21 Posts
Discussion Starter · #3 ·
JSntgRvr said:
What's the Operating System, Windows 98?

Meanwhile, open the computer's console. Check for lose cables such as Ribbon and power cables. Refresh their contact by removing the cables and reconnecting them. See if that makes a difference.

Also explain if at startup the BIOS logo is displayed. What happens afterwards?
 

·
Registered
Joined
·
21 Posts
Discussion Starter · #4 ·
I checked for loose cables, The only thing it says is insert systems disc.Hewitt packard they told me to turn it off, urn it back on while pressing f8 key.. It's suppose to bring up a menu.I try it it did't work.I am running windows 98 SE.
 

·
Retired Moderator and Malware Specialist
Joined
·
18,549 Posts
You will need a Windows 98 Startup Diskette. You can download one at www.bootdisk.com.

Insert the startup diskette and start the computer. At the Menu select Command prompt without CD support.

At the Prompt type the following and press Enter:

Sys C:

After the system files have been transfered, remove the diskette and start the computer.

If you receive an error as "Invalid Disk drive", let me know.

If the above does not resolve the issue, restart the computer and tap on F1 during startup. Once in the BIOS Setup utility, Set Defaults (F5) and exit saving the changes.

If still this wont work, start the computer and tap on F1 during startup. Scout around the BIOS Setup utility. See if the Hard drive is being detected and that the Boot order is set to A: (Floppy) First, CD_ROM (Second), IDE_0 (Hard drive) Last.

Let me know your findings.
 

·
Registered
Joined
·
21 Posts
Discussion Starter · #6 ·
I will try that..I am not on line anymore. Can i still do what you told me to do?I am using the library computer, I checked my replys eveyday.I will let you know tomorrow if it works.. thank-you.
 

·
Registered
Joined
·
21 Posts
Discussion Starter · #7 ·
I went to the BIOS Utility. It said my IDE hard drive... none. I couldn't find anything about the cr-rom or the floppy disk. It probably was there but i do not know much about computers this is my first one.My computers says BOOT DISK FAILURE, INSERT SYSTEM DISK PRESS ENTER.I will try and download a boot disk for WIN98SE at the site you told me to go bootdisk.com.
 

·
Retired Moderator and Malware Specialist
Joined
·
18,549 Posts
Seems that the hard drive crashed. Let me know if able to boot with a Boot disk.
 

·
Retired Moderator and Malware Specialist
Joined
·
18,549 Posts
If the hard drive is not recognized by the computer may be due to bad Data cables, power suply and others. So you will need to narrowdown the possible causes. In your position I would check this issue in the following order:

1. Replace the IDE Ribbon cables.
2. Check the Power Supply Unit (This has to be done y a tech as Tools are needed to do this.
3. Test the Computer with a known working hard drive.

I wont spend on a hard drive prior to testing all of the above. If the computer still show problems after doing all these, then I would say its the Main board. You have to test all possibilities prior to make a final determination.

The boot disk wont recognize the hard drive if this is not being recognized in the BIOS.
 

·
Registered
Joined
·
21 Posts
Discussion Starter · #11 ·
My computer says insert a systems disk. Someone is sending me a 98SE disk. what would happend if i insert the disk?? would i do more damage to my computer??? :mad: :mad:
 

·
Retired Moderator and Malware Specialist
Joined
·
18,549 Posts
Your main issue is that the hard drive is not being recognized. This is due to bad Data (Ribbon) Cables, or a hard drive failure. Another possibility could be the Power Supply Unit (PSU) malfuctioning. It does not matter what you do, as long as the Hard drive is not recognized, every effort will fail.
 
1 - 12 of 12 Posts
Status
Not open for further replies.
Top