Tech Support Guy banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
32 Posts
Discussion Starter · #1 ·
I am changing the wic on a cisco 1700 router from a t1dsu/csu to a 1enet. Is there anything I else I have to do or is it plug and play? Normally I would just do it and see what happens. I already configured DHCP, fa0, nat pools, static nat, static routes...everything but the s0 interface, DHCP WORKS TOO, horay! I should back up just in case. Anyone know if the 1enet is plug and play?
 

·
Registered
Joined
·
152 Posts
When I did my cisco 2621, I called the ISP, and they said that the WIC will gather all of the information from the line once it's up and plugged in.
So I would say that as long as you have your config backed up, plug it in and see if it works.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top