Tech Support Guy banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter · #1 ·
I have a cisco aironet AIR-LAP1142N-A-K9 access points. When I try to do a wr to save the config (added community strings) I get a: "[OK] NVRAM Verification Failed " This AP does point back to a controller. How do I save the config or is there a problem with my system? I've been trying to find out on the Cisco web page how these things work, I do think they pick up their config from the controller but I'm not sure.

Here's the files from the system:
Directory of archive:/

No files in directory

No space information available
Directory of system:/

2 dr-x 0 <no date> memory
1 -rw- 17274 <no date> running-config

No space information available
Directory of nvram:/

30 -rw- 0 <no date> startup-config
31 ---- 0 <no date> private-config
1 ---- 4100 <no date> lwapp_ap.cfg
6 ---- 528 <no date> lwapp_ap_tlv.cfg
7 -rw- 0 <no date> ifIndex-table

32768 bytes total (25548 bytes free)
Bollinger1-AP2#dir all-filesystems
Directory of flash:/

2 -rwx 96274 Dec 23 2009 19:47:32 +00:00 event.log
3 -rwx 332 Nov 14 2011 15:59:24 +00:00 env_vars
31 -rwx 17274 Nov 14 2011 18:44:26 +00:00 config.txt
5 drwx 128 Mar 1 2002 00:01:57 +00:00 c1140-rcvk9w8-mx
4 drwx 256 Dec 23 2009 19:42:10 +00:00 c1140-k9w8-mx.124-21a.JA2
35 -rwx 3566 Nov 14 2011 18:44:26 +00:00 private-config
36 -rwx 7192 Nov 14 2011 18:44:26 +00:00 private-multiple-fs

32385024 bytes total (25461248 bytes free)
Directory of zflash:/

2 -rwx 96274 Dec 23 2009 19:47:32 +00:00 event.log
3 -rwx 332 Nov 14 2011 15:59:24 +00:00 env_vars
31 -rwx 17274 Nov 14 2011 18:44:26 +00:00 config.txt
5 drwx 128 Mar 1 2002 00:01:57 +00:00 c1140-rcvk9w8-mx
4 drwx 256 Dec 23 2009 19:42:10 +00:00 c1140-k9w8-mx.124-21a.JA2
35 -rwx 3566 Nov 14 2011 18:44:26 +00:00 private-config
36 -rwx 7192 Nov 14 2011 18:44:26 +00:00 private-multiple-fs

32385024 bytes total (25461248 bytes free)
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top