Tech Support Guy banner

Changed drives & now won't boot

910 Views 8 Replies 7 Participants Last post by  Rich-M
I couldn't find a problem like mine on the forum, so thought I'd post this. I have computer#1 that kept rebooting itself, so I took the drive out & put it as a secondary drive in computer#2 & works fine. But when I change the jumpers & try to make it Primary (and the only drive), it won't boot into windows. I just get the option screen & no safe modes work. The jumpers are the same as when it worded in C#1 as primary. I changed the CMOS battery & reset. Unplugged everything except drive at end of primary ribbon. Drive search all AUTO. AMD K7S5A Athlon XP 1800+ & IBM Deskstar 41.4GB 7200RPM MOD IC35L040AVVA07-0.
What am I missing?
Not open for further replies.
1 - 1 of 9 Posts
try this
put it back in original PC

see if it will work ion safe mode tap F8 as booting


control panel>
advanced tab>
startup and recovery - settings>
under the title - system failure
untick - automatically restart;en-us;320299

now when it crashes - it willnot restart and the blue screen should stay on the screen
post the info on the screen
it will give the errorcodes and a filename, if caused by a driver.
See less See more
1 - 1 of 9 Posts
Not open for further replies.