Please click the link below for your operating system to download the TSG SysInfo Utility. Click on "Save File" then double-click the file to run it. Copy and paste the report in your initial post. Windows 7 and later (downloads a file named tsginfo.exe) | Windows XP (downloads a file named SysInfo.exe)

Changed drives & now won't boot

911 Views 8 Replies 7 Participants Last post by Rich-M, Jan 29, 2007

wdwkr

Discussion Starter · Jan 1, 2007

I couldn't find a problem like mine on the forum, so thought I'd post this. I have computer#1 that kept rebooting itself, so I took the drive out & put it as a secondary drive in computer#2 & works fine. But when I change the jumpers & try to make it Primary (and the only drive), it won't boot into windows. I just get the option screen & no safe modes work. The jumpers are the same as when it worded in C#1 as primary. I changed the CMOS battery & reset. Unplugged everything except drive at end of primary ribbon. Drive search all AUTO. AMD K7S5A Athlon XP 1800+ & IBM Deskstar 41.4GB 7200RPM MOD IC35L040AVVA07-0.
What am I missing?

Save

Status: Not open for further replies.

1 - 1 of 9 Posts

bigbear

· #2 · Jan 1, 2007

Hello and welcome to TGS
If I am understanding correctly, you cant take a boot drive from one machine and expect it to boot in another as it is "configured" to the first machine.( unless it is identical)
You will have to do a clean install of windows

Save

1 - 1 of 9 Posts

Status: Not open for further replies.

Top Contributors this Month