Tech Support Guy banner
  • Please post in our Community Feedback thread for help with the new forum software! If you are having trouble logging in, please Contact Us for assistance.
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
tried to install cd rom wont let me says make sure path and file names are correct and that all required libarys are available when i try to use a cd ive alreay installed say d drive is not accessiable or sometimes it says please insert cd rom in drive when it is in the drive
 

·
Banned
Joined
·
4,888 Posts
Refresh the drivers through Device Manager in SafeMode.

In safemode, right-click My computer; choose properties; click the device manager tab; click the plus sigb beside CDROM; Highlight each device inside in turn and click the add/remove button foe each one. Restart using the Start buttom.

Windows will redetect the CDROM and refresh the drivers.

If the CDROM needs the plugs reseated on the back of the drive and/or where it plugs on the mainboard or, the CDROM is no good, then the drive will not be re-detected. That then will tell you if there';s further problems.
 

·
Banned
Joined
·
4,888 Posts
Sounds like the CDROM is bad. Get the bench-fee and hourly wage before you allow any service person to touch it if you have a pro-shop troubleshoot/fix it. A run-off-the-mill CDROM (Delta) is about $50. Takes 45 minutes to troiubleshoot and replace. Done it myself a lot.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top